Difference between revisions of "Run plan"

Revision as of 14:12, 14 March 2014

Run plan with CW beam

• Both HRS at 15 degrees, central momentum P0 = 2.0 GeV/c

• Establish beam on target using BeO target.
  • Move target to BeO
  • Raster off, 5uA current
  • Visual inspection on target camera for spot on BeO target
  • If beam spot not visible
    • Ask max current that can be delivered?
    • Move beam positions by 1 or 2 mm?
  • Halog BPMs information

• Spot++ with carbon target
  • Move to carbon target
  • Raster 3x3 mm, 5uA
  • Take LHRS and RHRS runs
  • Do spot++ to look for raster size and beam spot
  • Halog plots of BPMs and raster size

BCM calibration procedure

HRS checkout

Wire target runs

Target boiling studies

12_GeV_March_2014_running