Difference between revisions of "Run plan"
From Hall A Wiki
| (13 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
'''Run plan with CW beam''' | '''Run plan with CW beam''' | ||
| + | |||
| + | * Both HRS at 15 degrees, central momentum P0 = 2.0 GeV/c | ||
* Establish beam on target using BeO target. | * Establish beam on target using BeO target. | ||
| Line 5: | Line 7: | ||
** Raster off, 5uA current | ** Raster off, 5uA current | ||
** Visual inspection on target camera for spot on BeO target | ** Visual inspection on target camera for spot on BeO target | ||
| + | ** If beam spot not visible | ||
| + | *** Ask max current that can be delivered? | ||
| + | *** Move beam positions by +/-1 or 2 mm? | ||
** Halog BPMs information | ** Halog BPMs information | ||
| − | * Spot++ | + | |
| + | * Spot++ with carbon target | ||
** Move to carbon target | ** Move to carbon target | ||
** Raster 3x3 mm, 5uA | ** Raster 3x3 mm, 5uA | ||
| − | ** | + | ** Take LHRS run with T8 trigger (its a 103.7kHz pulser, so prescale=100) |
** Do spot++ to look for raster size and beam spot | ** Do spot++ to look for raster size and beam spot | ||
** Halog plots of BPMs and raster size | ** Halog plots of BPMs and raster size | ||
| + | |||
| + | [[Raster calibration]] | ||
| + | |||
| + | |||
| + | [[BCM calibration procedure]] | ||
| + | |||
| + | |||
| + | [[Moller commissioning]] | ||
| + | |||
| + | |||
| + | [[HRS checkout]] | ||
| + | |||
| + | |||
| + | [[Wire target runs]] | ||
| + | |||
| + | |||
| + | [[Target boiling studies]] | ||
[[12_GeV_March_2014_running]] | [[12_GeV_March_2014_running]] | ||
Latest revision as of 14:57, 16 March 2014
Run plan with CW beam
- Both HRS at 15 degrees, central momentum P0 = 2.0 GeV/c
- Establish beam on target using BeO target.
- Move target to BeO
- Raster off, 5uA current
- Visual inspection on target camera for spot on BeO target
- If beam spot not visible
- Ask max current that can be delivered?
- Move beam positions by +/-1 or 2 mm?
- Halog BPMs information
- Spot++ with carbon target
- Move to carbon target
- Raster 3x3 mm, 5uA
- Take LHRS run with T8 trigger (its a 103.7kHz pulser, so prescale=100)
- Do spot++ to look for raster size and beam spot
- Halog plots of BPMs and raster size
