Difference between revisions of "HRS Detector Calibrations"
From Hall A Wiki
| Line 34: | Line 34: | ||
<li> Gas Cherenkov (Barak Schmookler) <br> | <li> Gas Cherenkov (Barak Schmookler) <br> | ||
* Look at histograms (Npe vs. x, and Npe vs. Shower), compare with standard distributions, ideally there shoudl be no x dependence.<br> | * Look at histograms (Npe vs. x, and Npe vs. Shower), compare with standard distributions, ideally there shoudl be no x dependence.<br> | ||
| − | <li> Electromagnetic calorimeters (Longwu Ou) | + | <li> Electromagnetic calorimeters (Longwu Ou)<br> |
* Make sure all ADC channels have signals.<br> | * Make sure all ADC channels have signals.<br> | ||
* Calibrate with electrons.<br> | * Calibrate with electrons.<br> | ||
</ol> | </ol> | ||
* After these steps, the detectors should be fairly well calibrated. | * After these steps, the detectors should be fairly well calibrated. | ||
Revision as of 15:50, 16 October 2014
| Ebeam [GeV] | P0 [GeV/c] | θe [deg] | Collimator | Target | Fast Raster X x Y |
Beam Current | Trigger |
| 7.3 | 3.056 | 19.0 | None | Optics Carbon | 1 mm x 1 mm | 20μA | S0&&S2m |
- Check the timing and calibration constants (shower ADC gains, pedestals, timing offsets, pulse height corrections, attenuation lengths, efficiencies, position dependencies).
- VDCs and Straw Chambers (Yang Wang)
* Look at drift time spectra, is the shape reasonable? in the right time range?
* Fit for new time-to-distance map
* Look at focal plane distributions.
* Check fiducial tracking efficiency, is it > 95%, If not, then check TDC windows and tracking parameters.
- HRS Scintillators (Barak Schmookler)
* Look at all channels, compare against standard histograms.
* Are any channels firing at high rate (possible light leak)?
- Gas Cherenkov (Barak Schmookler)
* Look at histograms (Npe vs. x, and Npe vs. Shower), compare with standard distributions, ideally there shoudl be no x dependence.
- Electromagnetic calorimeters (Longwu Ou)
* Make sure all ADC channels have signals.
* Calibrate with electrons.
- After these steps, the detectors should be fairly well calibrated.
