Difference between revisions of "Sunday, November 8: OWL Shift"
From Hall A Wiki
(New page: If time remains, start spectrometer checkout and begin looking for HRS-calorimeter coincidences. For this part of the plan - contact Carlos (contact info on the white board). The calorime...) |
|||
| Line 1: | Line 1: | ||
| − | + | * General considerations | |
| + | ** We do not yet have an RC phone. Dave Gaskell is the current Run Coordinator. Please contact me directly via the JLab paging utility: [https://misportal.jlab.org/mis/staff/staffsearch.cfm] | ||
| + | ** Follow the generic [https://hallaweb.jlab.org/wiki/index.php/Instructions_for_shift_takers Instructions for shift takers] | ||
| + | ** In general, technical staff should not be contacted by the shift crew - please call the RC first. | ||
| + | ** If the run plan calls for some significant period of beam at 10 uA or greater please call Mahmoud Ahmad, who would like to perform a parasitic beam diagnostic test (no impact to us). His contact information will be written on the white board in the Counting House. | ||
| + | |||
| + | * Runplan for this shift | ||
| + | |||
| + | ** Continue LHRS-Calorimeter coincdence running on carbon. Beam current TBD. | ||
** Kinematics, DVCS Kin1: Ebeam = 7.3 GeV, PLHRS=2.71 GeV Theta_HRS=22.83 Theta_calo=12.35 | ** Kinematics, DVCS Kin1: Ebeam = 7.3 GeV, PLHRS=2.71 GeV Theta_HRS=22.83 Theta_calo=12.35 | ||
** Make sure to use the DVCS configuration for all runs. | ** Make sure to use the DVCS configuration for all runs. | ||
Revision as of 11:21, 8 November 2014
* General considerations
- We do not yet have an RC phone. Dave Gaskell is the current Run Coordinator. Please contact me directly via the JLab paging utility: [1]
- Follow the generic Instructions for shift takers
- In general, technical staff should not be contacted by the shift crew - please call the RC first.
- If the run plan calls for some significant period of beam at 10 uA or greater please call Mahmoud Ahmad, who would like to perform a parasitic beam diagnostic test (no impact to us). His contact information will be written on the white board in the Counting House.
- Runplan for this shift
- Continue LHRS-Calorimeter coincdence running on carbon. Beam current TBD.
- Kinematics, DVCS Kin1: Ebeam = 7.3 GeV, PLHRS=2.71 GeV Theta_HRS=22.83 Theta_calo=12.35
- Make sure to use the DVCS configuration for all runs.
