Difference between revisions of "Shielding hut for GEM electronics"

From Hall A Wiki
Jump to: navigation, search
Line 5: Line 5:
 
* 12GEp_Iso [https://userweb.jlab.org/~dasuni/GEM_Electronic_hut/12GEp_Iso.png]
 
* 12GEp_Iso [https://userweb.jlab.org/~dasuni/GEM_Electronic_hut/12GEp_Iso.png]
 
* 12GEp_Plan [https://userweb.jlab.org/~dasuni/GEM_Electronic_hut/12GEp_Plan.png]
 
* 12GEp_Plan [https://userweb.jlab.org/~dasuni/GEM_Electronic_hut/12GEp_Plan.png]
 +
 +
  
 
Few extra details from Alan,
 
Few extra details from Alan,
Line 11: Line 13:
 
* There is a steel plates between two green boxes (bottom-2.5" thick & front-7.5" thick). The bottom plate allows for the front plates to match the height of the green blocks for stacking the top plates.
 
* There is a steel plates between two green boxes (bottom-2.5" thick & front-7.5" thick). The bottom plate allows for the front plates to match the height of the green blocks for stacking the top plates.
 
* And there is a steel plate (120" x 5" x 43") on the top (blue).
 
* And there is a steel plate (120" x 5" x 43") on the top (blue).
 +
 +
  
 
The drawings for the magnet support frame (by Alan) -
 
The drawings for the magnet support frame (by Alan) -

Revision as of 09:37, 8 September 2016

The main purpose of this study to determine the neutron-induced damage on electronics at the shielding hut for GEp.

Main drawings for the shielding hut are,

  • 12GEp_Elevation [1]
  • 12GEp_Iso [2]
  • 12GEp_Plan [3]


Few extra details from Alan,

  • The green boxes are cast steel 52" x 52" x 26".
  • The distance between two green boxes are 96".
  • There is a steel plates between two green boxes (bottom-2.5" thick & front-7.5" thick). The bottom plate allows for the front plates to match the height of the green blocks for stacking the top plates.
  • And there is a steel plate (120" x 5" x 43") on the top (blue).


The drawings for the magnet support frame (by Alan) -