Difference between revisions of "Solid Heavy Gas Cherenkov"

Revision as of 11:25, 17 October 2016

material
- tedlar/mylar/tedlar from Madico
- "We have used this type of material for spectrometer vacuum windows. It is made of high end sail cloth (actual sail material for boats). It is not the easiest material to work with but will most likely work for you. You may have to pretension the cloth depending on the manufacturer." from David Meekins of jlab target group, https://www.sailmakerssupply.com/product/racing-laminate-sailcloth-seconds/sailcloth, It's actually Kevlar/Mylar laminates
- cheap kevlar, http://www.mcmaster.com/#kevlar/=14kwgqs , Its thickness 0.6mm is a bit bigger than 0.4mm used by BNL vacuum window, Not sure if it's because it's "cut resistant"

data files are at /work/halla/solid/hgc/DAQ_test_201507/sft_rootfiles

@@ Line 1: / Line 1: @@
-== DAQ test 2015_07 ==
+== info ==
+== prototyping and R&D ==
-/work/halla/solid/hgc/DAQ_test_201507/sft_rootfiles
+=== window ===
+* material
+** tedlar/mylar/tedlar from Madico
+** "We have used this type of material for spectrometer vacuum windows. It is made of high end sail cloth (actual sail material for boats). It is not the easiest material to work with but will most likely work for you. You may have to pretension the cloth depending on the manufacturer." from David Meekins of jlab target group, https://www.sailmakerssupply.com/product/racing-laminate-sailcloth-seconds/sailcloth, It's actually Kevlar/Mylar laminates
+** cheap kevlar, http://www.mcmaster.com/#kevlar/=14kwgqs , Its thickness 0.6mm is a bit bigger than 0.4mm used by BNL vacuum window, Not sure if it's because it's "cut resistant"
+=== readout ===
+==== H12700_03 test 2015/07 ====
+data files are at /work/halla/solid/hgc/DAQ_test_201507/sft_rootfiles
+==== H12700_03 test 2016/09 ====