Difference between revisions of "SBS DAQ: GEM TEDF BigBite setup"
From Hall A Wiki
m (→Frontend scripts to use on tedbbdaq) |
|||
Line 9: | Line 9: | ||
=== Frontend scripts to use on tedbbdaq === | === Frontend scripts to use on tedbbdaq === | ||
− | ==== < | + | ==== <tt>startCoda</tt> ==== |
* executes each CODA component (platform, rcgui, PEB, all ROCs) in a separate xterm | * executes each CODA component (platform, rcgui, PEB, all ROCs) in a separate xterm | ||
− | ==== < | + | ==== <tt>restartStuff</tt> ==== |
* kills and restarts the PEB and ROCs. The xterms are not killed with this script. | * kills and restarts the PEB and ROCs. The xterms are not killed with this script. | ||
− | ==== < | + | ==== <tt>kcoda</tt> ==== |
* kills all CODA components | * kills all CODA components | ||
− | |||
− | |||
== Useful stand-alone programs == | == Useful stand-alone programs == |
Revision as of 03:22, 4 December 2020
Contents
CODA scripts
- - github page
- - Scripts locations:
- daq@tedbbdaq
- -
~/gem_scripts/setupCODA.bash
- -
~/gem_scripts/coda_scripts/
- sbs-onl@intelbbgem:
- -
~/coda_scripts/
Frontend scripts to use on tedbbdaq
startCoda
- executes each CODA component (platform, rcgui, PEB, all ROCs) in a separate xterm
restartStuff
- kills and restarts the PEB and ROCs. The xterms are not killed with this script.
kcoda
- kills all CODA components
Useful stand-alone programs
remex
$CODA_BIN/remex <remexHost> <function call>
- Execute a function call on the specified remote Host
- - Run without arguments for usage
tiLibTest
$CODA_VME/ti/test/tiLibTest <TI slot number>
- Test triggering capabilities of the local TI.
- - Puts the local TI in master mode (with no slaves).
- - Accepts triggers either from Front Panel TSinputs or Internal Random Pulser
i2c_test
$LINUXVME/mpd/libsrc/test/i2c_test <mpd slot number>
- Test the initialization and configuration of the APVs in the specified MPD.
- - Does the same initialization that is done in
mpd_list.c:rocDownload()
- - Also attempts the readback of the APV registers with
mpdApvStatus(0xffff)
vme_display
$CODA_VME_BIN/vme_display <VME Address> <read size in bytes>
- Display the read value of specified size from the specified VME address.
- - Run without arguments for usage
vme_modmem
$CODA_VME_BIN/vme_modmem <VME Address> <read/write size in bytes>
- Modify the value of specified size of the specified VME address.
- - Run without arguments for usage
MPD/SSP/APV Config files
- Config files for configuration of APVs and MPD / SSP can be found in
- -
sbs-onl@intelbbgem:~/bbgem-cfg/
- The SSP readout list (
mpd5_ssp_list.so
) uses
- -
sbs-onl@intelbbgem:~/bbgem-cfg/ssp_config.txt
- -
sbs-onl@intelbbgem:~/bbgem-cfg/ssp_apv_default.txt
- The SSP readout list (
- The MPD readout list (
mpd_list.so, mpd_slave_list.so
) uses
- -
sbs-onl@intelbbgem:~/bbgem-cfg/mpd_config.txt
- -
sbs-onl@intelbbgem:~/bbgem-cfg/mpd_apv_default.txt
- The MPD readout list (
- Both use common files to configure the MPDs/APVs given the MPD's slot number. For example, slot 5 MPD:
- -
sbs-onl@intelbbgem:~/bbgem-cfg/bbgem_crate_1/MPD_vmeSlot_5.cfg
Machines in use
atedf3
- NFS server, tftp server for VME Controllers
- CODA and hardware drivers in
/data/disk2/SBS/
- CODA and hardware drivers in
- Read-only permissions for all machines in 36 subnet
- Read-Write permissions for hallavme12pc,sbsvme25
tedbbdaq
- DAQ Computer (RunControl, Event Building)
- Mount
atedf3:/data/disk2/SBS
to/mnt/SBS
- - Uses autofs.
/etc/auto.SBS
should be included in a line in/etc/auto.master
- Mount
-
coda/
CODA (3.10)
-
intelbbgem
- XVR16 VME Controller
- 'sbs-onl' login
- Slots ? : SSP
- Slot 21: TI
- LINUXVME (mpd,ssp):
~/linuxvme/
- readout lists :
~/rol/
hatsv48
- XVB601 VME Controller
- 'daq' login
- Slots 2-8, 10-16: MPDs
- Slot 21: TI
CODA environment setup script
Using BASH, source the environment setup script:
source ~/SBS-GEM-Cleanroom/env/setupCODA