Difference between revisions of "RICH Information for experts"
Line 16: | Line 16: | ||
To replay the data: | To replay the data: | ||
− | 1. | + | 1. login to adaq@adaql# |
− | 2. | + | 2. enter ''analyzer'' |
− | 3. | + | 3. do: ''replay_det_L(#run, #event) |
− | 4. use on the available macros: the old ''evdisplay.C'' or ''ec_ana.C'' which is in progress | + | 4. when done, exit ''analyzer'' |
+ | |||
+ | 5. use on the available macros: the old ''evdisplay.C'' or ''ec_ana.C'' which is in progress | ||
== How to change the delay between trigger (T3) and T/H == | == How to change the delay between trigger (T3) and T/H == | ||
+ | (incomplete ... check required by Alexandre!!!) | ||
Approximate instruction: | Approximate instruction: |
Revision as of 11:18, 3 February 2009
Contents
Reconstruction Program (Guido's program)
The latest (18/Nov/2008) RICH reconstruction program is in adaql#/adaqfs/home/adaq/e06010/cusanno/test_src where #=1...7.
The cluster reconstruction is disabled
The official copy should be in the CVS repository. To access it:
cvs -d :ext:username@jlab.org:/group/halla/analysis/cvs co rich
Replay and analize the data
The latest (18/Nov/2008) macros, db and tools are in the directory adaql#/adaqfs/home/adaq/e06010/cusanno/onlana1
To replay the data:
1. login to adaq@adaql#
2. enter analyzer
3. do: replay_det_L(#run, #event)
4. when done, exit analyzer
5. use on the available macros: the old evdisplay.C or ec_ana.C which is in progress
How to change the delay between trigger (T3) and T/H
(incomplete ... check required by Alexandre!!!)
Approximate instruction:
1. ssh atrig@adaql2
2. cd trigger
3. trig -e trigger-left.map
4. Push Ldelay1
5. The last 3rd and 2nd register define the fine delay of the two signals (8 = -120 ns, 128 = + 120 ns)
Ask Alexandre for detailed information
Pedestals
Back to the Left RICH home page