Difference between revisions of "Starting CODA for shift workers"
From Hall A Wiki
(19 intermediate revisions by 4 users not shown) | |||
Line 1: | Line 1: | ||
− | + | https://hallaweb.jlab.org/wiki/index.php/BigBite_trigger_and_DAQ | |
− | * | + | *DAQ should be running already on hadesk4 in a VNC |
− | + | ||
− | + | *If the VNC is not opened, or after logging in as adaq@adaq2 | |
+ | **type: RunCoda. VNC password is the adaq password. | ||
+ | **If the VNC session does not exist (a window popup will say 'connection refused' after typing RunCoda), the VNC session must be started. | ||
+ | **To start the DAQ VNC session, log into sbs-onl@adaq2 and run 'start_daq_vnc' (no quotes). This will start the VNC session on adaq2, port 4. | ||
+ | **To reconnect to an open VNC session, on sbs-onl@adaq2, type vncviewer. In the pop-up window, type adaq2:4 and click Connect. | ||
− | + | *In the VNC session, use the CODA script buttons on first Desktop to start the ROC Xterms and Run Control | |
+ | **Click on SBS_coda_scripts icon/directory | ||
+ | **Click StartXTerms icon | ||
+ | **Click CODA Run Control icon | ||
+ | **If needed, use Restart CODA components | ||
− | + | *In runcontrol make sure sbsts session and config GEnII-3stream are chosen | |
− | + | ||
− | + | ||
− | + | ||
− | *In runcontrol make sure sbsts session | + | |
*To start a run | *To start a run | ||
**hit configure button in runcontrol, might need to hit it twice if vtpROC20 misses the first configuration | **hit configure button in runcontrol, might need to hit it twice if vtpROC20 misses the first configuration | ||
− | **hit download button | + | **hit download button ( wait until vtpROC20 is done ) |
+ | **check prescale factors ( To open prescale gui : ssh to sbs-onl@adaq2 and type prescale ) | ||
**hit Start Run button | **hit Start Run button | ||
+ | **fill in run information in pop up box ( make sure you have correct target / runtype ) | ||
+ | |||
+ | *Pedestal run | ||
+ | **select GEnII-3stream-ped config | ||
+ | **start run | ||
+ | **stop run after at least 30 k events | ||
+ | **go back to GEnII-3stream configuration and start regular rub | ||
+ | |||
+ | *Troubleshooting | ||
+ | **ER1 getting stuck at prestart | ||
+ | ***hit reset in runcontrol | ||
+ | ***hit configure, download, prestart and start a run | ||
+ | |||
+ | |||
+ | **SEB and ER stuck at end of run | ||
+ | ***hit reset in runcontrol | ||
+ | ***hit restart CODA components | ||
+ | ***redo configure and download | ||
+ | ***start a run | ||
+ | **GEM module not initializing or getting Errors | ||
+ | ***Reboot VTP crate : open in browser http://hallavme12.jlab.org (open the browser in the VNC unless you have password for crate you're power cycling) | ||
+ | |||
+ | More on GEMs in https://sbs.jlab.org/DocDB/0003/000303/001/GEM_operations.pdf | ||
+ | |||
+ | * All remote switches at https://hallaweb.jlab.org/wiki/index.php/Crate_resets | ||
+ | |||
+ | * rcgui not appearing | ||
+ | |||
+ | platform migth need to be restarted | ||
+ | ssh adaq@adaq2 | ||
+ | sudo systemctl restart platform.service | ||
+ | use the killall xterm button and restart all terminals with Start Xterms | ||
+ | start run | ||
+ | |||
+ | |||
+ | *if you are stuck check contact expert on slack ( in 4th desktop web browser ) or call DAQ on call ( number on slack channel on-call or on whiteboard) |
Latest revision as of 13:38, 4 October 2022
https://hallaweb.jlab.org/wiki/index.php/BigBite_trigger_and_DAQ
- DAQ should be running already on hadesk4 in a VNC
- If the VNC is not opened, or after logging in as adaq@adaq2
- type: RunCoda. VNC password is the adaq password.
- If the VNC session does not exist (a window popup will say 'connection refused' after typing RunCoda), the VNC session must be started.
- To start the DAQ VNC session, log into sbs-onl@adaq2 and run 'start_daq_vnc' (no quotes). This will start the VNC session on adaq2, port 4.
- To reconnect to an open VNC session, on sbs-onl@adaq2, type vncviewer. In the pop-up window, type adaq2:4 and click Connect.
- In the VNC session, use the CODA script buttons on first Desktop to start the ROC Xterms and Run Control
- Click on SBS_coda_scripts icon/directory
- Click StartXTerms icon
- Click CODA Run Control icon
- If needed, use Restart CODA components
- In runcontrol make sure sbsts session and config GEnII-3stream are chosen
- To start a run
- hit configure button in runcontrol, might need to hit it twice if vtpROC20 misses the first configuration
- hit download button ( wait until vtpROC20 is done )
- check prescale factors ( To open prescale gui : ssh to sbs-onl@adaq2 and type prescale )
- hit Start Run button
- fill in run information in pop up box ( make sure you have correct target / runtype )
- Pedestal run
- select GEnII-3stream-ped config
- start run
- stop run after at least 30 k events
- go back to GEnII-3stream configuration and start regular rub
- Troubleshooting
- ER1 getting stuck at prestart
- hit reset in runcontrol
- hit configure, download, prestart and start a run
- ER1 getting stuck at prestart
- SEB and ER stuck at end of run
- hit reset in runcontrol
- hit restart CODA components
- redo configure and download
- start a run
- GEM module not initializing or getting Errors
- Reboot VTP crate : open in browser http://hallavme12.jlab.org (open the browser in the VNC unless you have password for crate you're power cycling)
- SEB and ER stuck at end of run
More on GEMs in https://sbs.jlab.org/DocDB/0003/000303/001/GEM_operations.pdf
- All remote switches at https://hallaweb.jlab.org/wiki/index.php/Crate_resets
- rcgui not appearing
platform migth need to be restarted
ssh adaq@adaq2 sudo systemctl restart platform.service use the killall xterm button and restart all terminals with Start Xterms start run
- if you are stuck check contact expert on slack ( in 4th desktop web browser ) or call DAQ on call ( number on slack channel on-call or on whiteboard)