Difference between revisions of "Test Lab DAQ test stands"
From Hall A Wiki
(→CODA Installation) |
(→CODA Installation) |
||
Line 29: | Line 29: | ||
== CODA Installation == | == CODA Installation == | ||
* In the future, there will be multiple DAQ test stands and they will likely run at the same time. So, the CODA should be installed locally on a desktop to avoid conflicts. There will be a dedicated "coda" account to store the environments, setup etc. | * In the future, there will be multiple DAQ test stands and they will likely run at the same time. So, the CODA should be installed locally on a desktop to avoid conflicts. There will be a dedicated "coda" account to store the environments, setup etc. | ||
+ | === CODA Installation and Configuration on "rivendell" === |
Revision as of 10:03, 22 April 2024
Server
- Name: hatestlab1.jlab.org (procured on 2024 April)
- Roles:
- The DHCP server for all the single board computers (SBCs)
- The TFTP server for SBCs
- The NFS server for computers under same LAN
- Set up pxeboot (summarized from reference)
- Install DHCP and Configure DHCP with two parameters:
- next-server IP --- IP address of the TFTP server to boot from
- filename --- path to boot file relative to TFTP root directory
Suggested parameters:filename "pxelinux.0";
next-server 129.57.xxx.xxx;
(hatestlab1) - DHCP seems to be all managed by CST; only one example at
atedf3: /etc/dhcpd.conf~
- Install nfs-utils, tftp-server, syslinux-tftpboot, syslinux
- Download
centos7_dist
androot, tftp
tgz files to the data disk for both VME and VTP - VME boot set up
- Modify the configuration file
centos7_dist/walkthrough_example.cfg
- NFS path should be under /data. ---- this is where the centos7 x86_64 filesystem will be unpacked
- Run the installation under
centos7_dist/
:./diskless_ROOTOS.sh walkthrough_example.cfg
This one generates a number of config files for the client OS and provides the installation commands to be run in sequence using sudo or as the root user../diskless_NFSexports.sh walkthrough_example.cfg
This script generates the exports files needed for NFS../diskless_PXE-TFTP.sh walkthrough_example.cfg
This script generates the configuration and installation commands for PXE and TFTP.
- Modify the configuration file
- VTP boot set up
- The configuration file is similar to VME boot set up, mostly swapping x86_64 with armv7.
./diskless_UBOOT.sh walkthrough_vtp_example.cfg
This script generates the ubootenv.bin
that needs to be loaded onto the microSD used by the VTP- Copy the resulting file
output/env.bin
to the VTPs microSD FAT partition. - VTP modules we received usually have SD card that is already set up
- Enable and start the NFS server and TFTP server
- Boot the VME/VTP
- First login: set up
daq
account
- First login: set up
CODA Installation
- In the future, there will be multiple DAQ test stands and they will likely run at the same time. So, the CODA should be installed locally on a desktop to avoid conflicts. There will be a dedicated "coda" account to store the environments, setup etc.