Difference between revisions of "June 20th 2025"
From Hall A Wiki
Line 1: | Line 1: | ||
*Subsystem status | *Subsystem status | ||
− | ** | + | **VTP |
+ | *** 2 crates setup for VTP and SSP, can take data with regular firmware - issue with new firmware | ||
+ | *** plan to switch to VTP readout | ||
+ | *** ask to Ben for more board Optical to VXS : just need one | ||
+ | *** Ching will get one to go in the hall | ||
+ | ** GEMs status | ||
+ | *** adjusted baseline on APV : raised it and seems to improve the issue of sagging and common mode subtraction issue | ||
+ | *** Slot 17 vtp5 drops from time to time : will replace payload and transceiver - | ||
+ | *** slot 20 vtp 4 : might be APV - out but might try to get back | ||
+ | *** fixed intelbbmpd1 : wrong IP in general button - now full reset works | ||
+ | *** set VTP to retry to boot if first boot fails ask to Ben or Bryan | ||
+ | **HCal | ||
+ | ***link fails to start so sometimes, power cycle crate fixes it | ||
+ | *** VTP hanging completly from time to time : power cycling fix - if happens too often might replace VTP | ||
+ | (crate 1 and on GEMs ) | ||
+ | *** | ||
+ | **cron job on adaq1 : epics logger and MSS cleaning script | ||
+ | **Ecal | ||
+ | *** add in how to the ECAl reboot GUI | ||
− | ** | + | ** add dumb network switch to rebooot switch ( make sure it is plugged directly to main switch ) |
+ | |||
*Plan for next 2 weeks | *Plan for next 2 weeks |
Revision as of 11:17, 20 June 2025
- Subsystem status
- VTP
- 2 crates setup for VTP and SSP, can take data with regular firmware - issue with new firmware
- plan to switch to VTP readout
- ask to Ben for more board Optical to VXS : just need one
- Ching will get one to go in the hall
- GEMs status
- adjusted baseline on APV : raised it and seems to improve the issue of sagging and common mode subtraction issue
- Slot 17 vtp5 drops from time to time : will replace payload and transceiver -
- slot 20 vtp 4 : might be APV - out but might try to get back
- fixed intelbbmpd1 : wrong IP in general button - now full reset works
- set VTP to retry to boot if first boot fails ask to Ben or Bryan
- HCal
- link fails to start so sometimes, power cycle crate fixes it
- VTP hanging completly from time to time : power cycling fix - if happens too often might replace VTP
- VTP
(crate 1 and on GEMs )
- cron job on adaq1 : epics logger and MSS cleaning script
- Ecal
- add in how to the ECAl reboot GUI
- add dumb network switch to rebooot switch ( make sure it is plugged directly to main switch )
- Plan for next 2 weeks
- histogramming firmware
- ROI firmware
- set VTP to retry to boot if first boot fails