Difference between revisions of "Channel Problems"
From Hall A Wiki
| (4 intermediate revisions by the same user not shown) | |||
| Line 7: | Line 7: | ||
[[Image:Run 29 Problem.png]] | [[Image:Run 29 Problem.png]] | ||
| − | Running a source near the center of the detector reveals that the X direction is not devoid of readings | + | |
| + | |||
| + | |||
| + | Running a source near the center of the detector reveals that the X direction is not devoid of readings. | ||
| + | |||
| + | [[Image:Run_28_Source.png]] | ||
| + | |||
| + | |||
| + | Running a source near the left in the Y direction reveals it is also capable of taking readings, though very reduced compared to the X. | ||
| + | |||
| + | |||
| + | [[Image:Run_25_Source.png]] | ||
| + | |||
| + | |||
| + | |||
| + | * June 14 | ||
| + | **By trying different configurations we appear to have isolated the problem. | ||
| + | [[Image:kapton.jpg]] | ||
| + | |||
| + | ** This leads us to believe there is a problem with the soldering on the kapton. | ||
Latest revision as of 15:45, 14 June 2010
It appears there are problems with the middle channels on the X direction and the left channels on the Y direction. These appear to be directly related to the cards used to take their input. Switching out the X cards did not show a difference in results.
Running a source near the center of the detector reveals that the X direction is not devoid of readings.
Running a source near the left in the Y direction reveals it is also capable of taking readings, though very reduced compared to the X.
- June 14
- By trying different configurations we appear to have isolated the problem.
- This leads us to believe there is a problem with the soldering on the kapton.
