Difference between revisions of "Gemeel122 log 375"
From Hall A Wiki
Line 47: | Line 47: | ||
| 406 ||Ped || Mar 15 2011 || || || 0V || || Pedestal look ok. RMS is small again,but problem with middle part of Ch1X. Start gas flow. [[https://hallaweb.jlab.org/wiki/index.php/Image:Ped_rms_406.gif RMS ]] [[https://hallaweb.jlab.org/wiki/index.php/Image:Ped_mean_406.gif Mean]] | | 406 ||Ped || Mar 15 2011 || || || 0V || || Pedestal look ok. RMS is small again,but problem with middle part of Ch1X. Start gas flow. [[https://hallaweb.jlab.org/wiki/index.php/Image:Ped_rms_406.gif RMS ]] [[https://hallaweb.jlab.org/wiki/index.php/Image:Ped_mean_406.gif Mean]] | ||
|- | |- | ||
− | | 407 ||cosmic || Mar 15 2011 || || || 3800V || || | + | | 407 ||cosmic || Mar 15 2011 || || || 3800V || || Junk |
+ | |- | ||
+ | | 408 ||ped || Mar 21 2011 || || || 3800V || || Hook up ch2 . Pedestals bad | ||
+ | |- | ||
+ | | 409 ||ped || Mar 21 2011 || || || 3800V || || Junk | ||
+ | |- | ||
+ | | 410 ||ped || Mar 21 2011 || || || 3800V || || Had ch1 cables into ch 2 input. | ||
|- | |- | ||
|- | |- | ||
|} | |} |
Revision as of 14:38, 21 March 2011
RUN # | Source/Cosmic/Pedestal | Date | Start Time | End Time | HV | # of events | notes |
---|---|---|---|---|---|---|---|
376 | Pedestal | Mar 9 2011 | 11:19:40 | 11:20:30 | 3.8V | 1593 | Chamber 1, problem with Y pedestals |
377 | Pedestal | Mar 9 2011 | 3.8V | junk, Do not see Y signals on the scope | |||
378 | Pedestal | Mar 9 2011 | 3.8V | junk, try changing board for Y readout. | |||
379 | Mar 9 2011 | 3.8V | junk | ||||
380 | Mar 10 2011 | 3.8V | junk while fixing problem. Not clear what the fix was. Maybe the connecting cable between gassiplex boards was not connected securely | ||||
381 | Mar 10 2011 | 3.8V | junk, low voltage off! | ||||
382 | Mar 10 2011 | 3.8V | junk, low voltage off! | ||||
383 | Ped | Mar 10 2011 | 3.8V | Good pedestal Chamber 1 | |||
384 | Cosmic | Mar 10 2011 | 3.8V | Tried 55Fe source. Not good | |||
385 | Cosmic | Mar 10 2011 | 3.8V | 90Sr source, center of chamber 1 | |||
386 | Cosmic | Mar 10 2011 | 3.8V | 90Sr source, move around chamber 1 | |||
387 | Cosmic | Mar 10 2011 | 15:03 | 3.86V | 90Sr source, move around chamber 1 | ||
388 | Ped | Mar 10 2011 | 3.86V | adjusted Ch 3 amplifier DC offset | |||
389 | Ped | Mar 10 2011 | 3.86V | Noticed ch 3 Y threshold had a gap | |||
390 | Ped | Mar 10 2011 | 0V | Connect up Chamber 2, play with DC offset for Ch 2 | |||
391 | Ped | Mar 10 2011 | 0V | Pedestal for Ch 1,2 and 3. Need to study | |||
404 | Ped | Mar 11 2011 | Pedestal look bad. [RMS ] [Mean] | ||||
406 | Ped | Mar 15 2011 | 0V | Pedestal look ok. RMS is small again,but problem with middle part of Ch1X. Start gas flow. [RMS ] [Mean] | |||
407 | cosmic | Mar 15 2011 | 3800V | Junk | |||
408 | ped | Mar 21 2011 | 3800V | Hook up ch2 . Pedestals bad | |||
409 | ped | Mar 21 2011 | 3800V | Junk | |||
410 | ped | Mar 21 2011 | 3800V | Had ch1 cables into ch 2 input. |