Difference between revisions of "L-S2 Scintillator"
From Hall A Wiki
| Line 1: | Line 1: | ||
Due to the setting of S2m, of which 90% signal from PMTs go to DIS to form TDC and trigger, while 10% of signal is sent to fast bus ADC without any amplification, we can not check on the ADC distribution but only can calibrate the TDC, or the timing alignment. | Due to the setting of S2m, of which 90% signal from PMTs go to DIS to form TDC and trigger, while 10% of signal is sent to fast bus ADC without any amplification, we can not check on the ADC distribution but only can calibrate the TDC, or the timing alignment. | ||
| − | = S2m | + | ==1, S2m TDC Alignment== |
Revision as of 17:41, 21 March 2011
Due to the setting of S2m, of which 90% signal from PMTs go to DIS to form TDC and trigger, while 10% of signal is sent to fast bus ADC without any amplification, we can not check on the ADC distribution but only can calibrate the TDC, or the timing alignment.
==1, S2m TDC Alignment==
