Difference between revisions of "Run Plan (DVCS3)"

Latest revision as of 16:58, 2 November 2016

For the 12 GeV DVCS experiment, go to [DVCS3 wiki ].

For the Fall of 2016 (FY2017), we plan on taking the kinematics 36_2, 36_3 and as many of the 60_* ones as we can.

@@ Line 1: / Line 1: @@
-Assume:
+For the 12 GeV DVCS experiment, go to [[https://hallaweb.jlab.org/wiki/index.php/DVCS3 DVCS3 wiki ]]. <br>
--longitudinally polarized beam
--max 20 uA but for short times when it can go higher
--7.7 GeV-4 pass or  beam
-== Commissioning/ Calibration ==
+For the Fall of 2016 (FY2017), we plan on taking the kinematics 36_2, 36_3 and as many of the  60_* ones as we can.
-=== Beam instruments ===
-==== BPM/Raster checks/Beam centering ====
-==== BCMs====
-Use the procedure that is under .....<br>
-Need: To insure that minimal beam lost in the machine can be measured, beam that would go up to about 100 uA. We also need to be the only hall receiving beam.<br>
-''Open question: Do we want to calibrate against the Unser monitor?
-''
-==== Moeller ====
+[[Image:Fall2016.jpg | 1200px]]
-The proposal goal calls for &Delta;P/P=1%.<br>
-''Open questions: How often do we want to measure the polarization?
-''
-==== Compton ====
+[[Fall 2016 optic plans]]
-=== Luminosity ===
+[[Fall 2016 calorimeter calibration (elastic)]]
-====Target Boiling ====
-====Deadtime check ====
-=== HRS ===
+<hr>
-===Measure efficiencies  S2m, Cerenkov and wire chamber ===
+<hr>
+<hr>
-=== Calorimeter ===
+<hr>
-==== DC readings ====
-=== Elastic Calibration ===
-==Main DVCS kinematics==
-==12 GeV Era Run Schedule ==
-more of that
-==12 GeV Era Run Schedule ==
-and even more