Difference between revisions of "Crate resets"

From Hall A Wiki
Jump to: navigation, search
 
(22 intermediate revisions by 5 users not shown)
Line 1: Line 1:
 
[[BigBite_trigger_and_DAQ]]
 
[[BigBite_trigger_and_DAQ]]
  
−
*VXS crates power supplies controls
+
*VXS crates power supplies controls (open in browser on VNC)
−
**http://hcalvxs1.jlab.org HCAL bottom crate
+
**ROC16: http://hcalvxs1.jlab.org<s>http://129.57.192.243</s> HCAL bottom crate
−
**http://hcalvxs2.jlab.org HCAL top crate
+
**ROC17: http://hcalvxs2.jlab.org HCAL top crate
 
**http://bbhodovxs.jlab.org hodoscope crate
 
**http://bbhodovxs.jlab.org hodoscope crate
−
**http://bbgemvxs.jlab.org  GEM crate middle SBS
+
**http://sbsgemcrate02.jlab.org  SBS GEM crate 02 (sbsvtp2)
−
**http://sbsgemvxs1.jlab.org GEM crate top SBS
+
**http://sbsgemcrate01.jlab.org SBS GEM crate 01 (sbsvtp2)
 
**http://hallavme12.jlab.org BB GEM crate
 
**http://hallavme12.jlab.org BB GEM crate
 
**http://grinchvxs.jlab.org GRINCH crate
 
**http://grinchvxs.jlab.org GRINCH crate
−
 
+
**http://lefthrsvxs.jlab.org HRS crate
 +
**http://bbshowervxs.jlab.org BB Shower VXS crate
 +
**http://sbsvme29crate.jlab.org/ VME 64X crate wiener scaler crate sbsvme29
 +
**http://129.57.192.239/ TS VXS crate
  
 
*CAEN crate'
 
*CAEN crate'
Line 23: Line 26:
 
**http://hareboot6.jlab.org
 
**http://hareboot6.jlab.org
 
***INFN crate port 7
 
***INFN crate port 7
−
***UVA crate port 6
+
***BB UVA crate port 6
 
**http://hareboot32.jlab.org
 
**http://hareboot32.jlab.org
−
***UVA LV
+
***BB UVA GEM LV port 5
 
***Trigger distribution box
 
***Trigger distribution box
 
**http://hareboot14.jlab.org
 
**http://hareboot14.jlab.org
 
***[https://sbs.jlab.org/wiki/index.php/GRINCH_Gas_Panel_Camera GRINCH gas panel camera switch 1]
 
***[https://sbs.jlab.org/wiki/index.php/GRINCH_Gas_Panel_Camera GRINCH gas panel camera switch 1]
 
***[https://sbs.jlab.org/wiki/index.php/GRINCH_LED_Pulser GRINCH LED pulser switch 8]
 
***[https://sbs.jlab.org/wiki/index.php/GRINCH_LED_Pulser GRINCH LED pulser switch 8]
 +
**[https://sbs.jlab.org/wiki/index.php/Remote_Power_Cycling Detailed Instructions on Power Cycling + hareboot14 Device List]
 +
**http://129.57.188.119
 +
***enpcamsonne PC port 4
 +
*** HCAL VTP 28 and 29 portserver port 5
 +
***HCal/BBCal Threshold Readback rpi port 8
 +
**http://prexreboot01.jlab.org
 +
***SBS MPD crate0 (sbsvme32) port 1
 +
***SBS MPD crate1 (sbsvme30) port 2
 +
**http://prexreboot02.jlab.org
 +
***SBS MPD crate2 (sbsvme25) port 1
 +
***SBS UVA Inline GEM LV port 2
 +
***Port 3-7 Fan In/Out modules
 +
**https://sbshvapc.jlab.org GEM HV power strip
 +
**https://sbshvapc2.jlab.org GEM HV power strip
  
 
*Portservers
 
*Portservers
Line 37: Line 54:
  
 
*INFN GEM LV
 
*INFN GEM LV
 +
**The INFN low voltage is accessible by browser.  This low voltage control has two channels: channel 1 controlslayer J0,  and channel 2 controls layer J2.  The operation manual for the low voltage power supply,  whichincludes a remote control command list, can be found:  CPX400DP.The following instructions can be usedto access the INFN low voltage power supply:1.  Open a firefox browser (from network)2.  In address bar, type:  129.57.188.51 (for BigBite LV supply)3.  Click on Instrument Control4.  TypeOPALL 0to turn off.  TypeOPALL 1to turn on
 +
 +
*Power cycle Scaler crate intelha9 (vme: sbsvme29) ( obsolete : go to http://sbsvme29crate instead )
 +
  /adaqfs/home/sbs-onl/bin/caen_power.py
 +
from any computer logged as sbs-onl
 +
  caen_power.py intelha9 0 # turn off
 +
  caen_power.py intelha9 1 # turn on
 +
 +
Do the turn on line until you see Status 513 ( 512 is still off it seems )

Latest revision as of 10:11, 12 April 2024

BigBite_trigger_and_DAQ

  • CAEN crate'
    • ssh sbs-onl@intelbbmpd
    • type minicom, if error do a "killall minicom" wait a minute and try again
    • tyoe CAEN
    • choose c
    • turn off and on the crate
    • exit from menu


  • Portservers
    • bbps1
      • port 3 sbsvtp1
      • port 4 sbsvtp3
  • INFN GEM LV
    • The INFN low voltage is accessible by browser. This low voltage control has two channels: channel 1 controlslayer J0, and channel 2 controls layer J2. The operation manual for the low voltage power supply, whichincludes a remote control command list, can be found: CPX400DP.The following instructions can be usedto access the INFN low voltage power supply:1. Open a firefox browser (from network)2. In address bar, type: 129.57.188.51 (for BigBite LV supply)3. Click on Instrument Control4. TypeOPALL 0to turn off. TypeOPALL 1to turn on
  • Power cycle Scaler crate intelha9 (vme: sbsvme29) ( obsolete : go to http://sbsvme29crate instead )
 /adaqfs/home/sbs-onl/bin/caen_power.py

from any computer logged as sbs-onl 

 caen_power.py intelha9 0 # turn off
 caen_power.py intelha9 1 # turn on

Do the turn on line until you see Status 513 ( 512 is still off it seems )

Retrieved from "https://hallaweb.jlab.org/wiki/index.php?title=Crate_resets&oldid=45235"