Difference between revisions of "Roc1 Setup"
From Hall A Wiki
(New page: boot device : fei0 processor number : 0 host name : cnu file name : /usr/local/coda/kern/5.5/vx5100_v2 inet on ethernet (e) : 129.57.36.27:fffffc00 ...) |
|||
| (5 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | boot device : fei0 | + | * ROC setup for vx5100 |
| − | processor number : 0 | + | boot device : fei0 |
| − | host name : cnu | + | processor number : 0 |
| − | file name : /usr/local/coda/kern/5.5/vx5100_v2 | + | host name : cnu |
| − | inet on ethernet (e) : 129.57.36.27:fffffc00 | + | file name : /usr/local/coda/kern/5.5/vx5100_v2 |
| − | inet on backplane (b): | + | inet on ethernet (e) : 129.57.36.27:fffffc00 |
| − | host inet (h) : 129.57.36.131 | + | inet on backplane (b): |
| − | gateway inet (g) : 129.57.36.1 | + | host inet (h) : 129.57.36.131 |
| − | user (u) : vx | + | gateway inet (g) : 129.57.36.1 |
| − | ftp password (pw) (blank = use rsh): vxworks111 | + | user (u) : vx |
| − | flags (f) : 0x20 | + | ftp password (pw) (blank = use rsh): vxworks111 |
| − | target name (tn) : vmedvcseel2 | + | flags (f) : 0x20 |
| − | startup script (s) : | + | target name (tn) : vmedvcseel2 |
| − | other (o) : | + | startup script (s) : vmedvcseel2v26_5100.boot |
| + | other (o) : | ||
| + | * ROC setup for MVME2300 (for CAENS 551B sequencer) | ||
| + | boot device : dc | ||
| + | processor number : 0 | ||
| + | host name : cnu | ||
| + | file name : /usr/local/coda/kern/5.5/vx2306_v3 | ||
| + | inet on ethernet (e) : 129.57.36.27:fffffc00 | ||
| + | host inet (h) : 129.57.36.131 | ||
| + | gateway inet (g) : 129.57.36.1 | ||
| + | user (u) : vx | ||
| + | ftp password (pw) : vxworks111 | ||
| + | flags (f) : 0x20 | ||
| + | target name (tn) : vmedvcseel2 | ||
| + | startup script (s) : vmedvcseel2v26_2300_seq551b.boot | ||
| + | |||
| + | For old 551 sequencer use vmedvcseel2v26_2300_seq551.boot | ||
Latest revision as of 15:02, 14 July 2010
- ROC setup for vx5100
boot device : fei0 processor number : 0 host name : cnu file name : /usr/local/coda/kern/5.5/vx5100_v2 inet on ethernet (e) : 129.57.36.27:fffffc00 inet on backplane (b): host inet (h) : 129.57.36.131 gateway inet (g) : 129.57.36.1 user (u) : vx ftp password (pw) (blank = use rsh): vxworks111 flags (f) : 0x20 target name (tn) : vmedvcseel2 startup script (s) : vmedvcseel2v26_5100.boot other (o) :
- ROC setup for MVME2300 (for CAENS 551B sequencer)
boot device : dc processor number : 0 host name : cnu file name : /usr/local/coda/kern/5.5/vx2306_v3 inet on ethernet (e) : 129.57.36.27:fffffc00 host inet (h) : 129.57.36.131 gateway inet (g) : 129.57.36.1 user (u) : vx ftp password (pw) : vxworks111 flags (f) : 0x20 target name (tn) : vmedvcseel2 startup script (s) : vmedvcseel2v26_2300_seq551b.boot
For old 551 sequencer use vmedvcseel2v26_2300_seq551.boot
