Difference between revisions of "Remote Crate Resets"

From Hall A Wiki
Jump to: navigation, search
(New page: There are a few ways to reboot the BigBite DAQ crates (TS12, ROC5, ROC6, ROC7, ROC9, ROC10). ===ROC3/ROC4=== * Type "reboot" in the portserver terminal window. * If doing above doesn't ...)
 
(→‎ROC5)
 
(14 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
There are a few ways to reboot the BigBite DAQ crates (TS12, ROC5, ROC6, ROC7, ROC9, ROC10).
+
There are a few ways to reboot the BigBite DAQ crates (TS12, ROC5, ROC8, ROC9, ROC10).
 +
 
 +
===ROC1/ROC2===
 +
 
 +
* Type "reboot" in the portserver terminal window.
 +
* If doing above doesn't help then go to HALL-A tools screen on hacsbc2 (left-hand side of shift leader's computer)
 +
* Under "MISCELLANEOUS" section click on "Crate Resets" and under "Resets from the Electron Detector Stack (right) Crate" look for SFI (Fastbus ROC 1 & ROC 2) #1 and click on "click to reset" button.
 +
 
 +
===TS0===
 +
 
 +
* Type "reboot" in the portserver terminal window.
 +
* If doing above doesn't help then go to HALL-A tools screen on hacsbc2 (left-hand side of shift leader's computer)
 +
* Under "MISCELLANEOUS" section click on "Crate Resets" and under "Resets from the Electron Detector Stack (right) Crate" look for Trigger Supervisor and click on "click to reset" button.
  
 
===ROC3/ROC4===
 
===ROC3/ROC4===
  
 
* Type "reboot" in the portserver terminal window.  
 
* Type "reboot" in the portserver terminal window.  
−
* If doing above doesn't help then go to HALL-A tools screen on shift leader's computer
+
* If doing above doesn't help then go to HALL-A tools screen on hacsbc2 (left-hand side of shift leader's computer)
−
* Under "MISCELLANEOUS" section click on "crate_reset" and select "beamline crate_reset", then look for LHRS ROC3/ROC4 and click on "click reset" button.
+
* Under "MISCELLANEOUS" section click on "Crate Resets" and under "Resets from the Hadron Detector Stack (left) Crate" look for SFI (Fastbus ROC 3 & ROC 4) #1 and click on "click to reset" button.
  
−
=== TS12 ===
+
===TS11===
 +
 
 +
* Type "reboot" in the portserver terminal window.
 +
* If doing above doesn't help then go to HALL-A tools screen on hacsbc2 (left-hand side of shift leader's computer)
 +
* Under "MISCELLANEOUS" section click on "Crate Resets" and under "Resets from the Hadron Detector Stack (left) Crate" look for Trigger Supervisor and click on "click to reset" button.
 +
 
 +
=== TS1 ===
 
* Type "reboot" in the portserver terminal window
 
* Type "reboot" in the portserver terminal window
−
* Direct a webbrowser to [http://hareboot30 hareboot30], and perform an "Immediate Reboot".
+
* If doing above doesn't help then direct a webbrowser to [http://hareboot30 hareboot30], and perform an "Immediate Reboot" for Outlet 1.
 +
* The password is located near the white board.
  
 
=== ROC5 ===
 
=== ROC5 ===
 
* Type "reboot" in the portserver terminal window
 
* Type "reboot" in the portserver terminal window
−
* Direct a webbrowser to [http://hareboot26 hareboot26], and perform an "Immediate Reboot" for the switch labeled ''ROC5 - bbvme1''.
+
* If doing above doesn't help then direct a webbrowser to [http://hareboot28 hareboot28], and perform an "Immediate Reboot" for the switch labeled ''bbvme1 ROC5'' on Outlet 1.
−
 
+
* The password is located near the white board.
−
=== ROC6/ROC7 ===
+
−
* Type "reboot" in the portserver terminal window
+
−
* Direct a webbrowser to [http://hareboot28 hareboot28], and perform an "Immediate Reboot".
+
  
 
=== ROC8/ROC9/ROC10 ===
 
=== ROC8/ROC9/ROC10 ===
Line 34: Line 50:
 
   roc8      8      FASTBUS ADC crate
 
   roc8      8      FASTBUS ADC crate
 
   roc9      9      Upper FASTBUS TDC crate
 
   roc9      9      Upper FASTBUS TDC crate
−
   ts2        2      Electron Trigger Supervisor
+
   ts2        2      Hadron Trigger Supervisor
 
  ---
 
  ---
 
   Using controller IP: bbcamac1.jlab.org.  I/O reg in slot 11
 
   Using controller IP: bbcamac1.jlab.org.  I/O reg in slot 11
 
   Using cnaf command:  './cnafb'
 
   Using cnaf command:  './cnafb'
−
 
−
=== ROC15 ===
 
−
log into hareboot6 using a web browser, usual password for APC, and reboot port 3
 
−
 
−
=== ROC14 ===
 
−
log hatsv40 2008
 
−
 
−
hit Q to go back to the menu
 
−
and C to display the crate informations again
 
−
Hit then O to turn the crate off and O again to turn it back
 
  
 
If you get :
 
If you get :

Latest revision as of 19:23, 3 February 2011

There are a few ways to reboot the BigBite DAQ crates (TS12, ROC5, ROC8, ROC9, ROC10).

ROC1/ROC2

  • Type "reboot" in the portserver terminal window.
  • If doing above doesn't help then go to HALL-A tools screen on hacsbc2 (left-hand side of shift leader's computer)
  • Under "MISCELLANEOUS" section click on "Crate Resets" and under "Resets from the Electron Detector Stack (right) Crate" look for SFI (Fastbus ROC 1 & ROC 2) #1 and click on "click to reset" button.

TS0

  • Type "reboot" in the portserver terminal window.
  • If doing above doesn't help then go to HALL-A tools screen on hacsbc2 (left-hand side of shift leader's computer)
  • Under "MISCELLANEOUS" section click on "Crate Resets" and under "Resets from the Electron Detector Stack (right) Crate" look for Trigger Supervisor and click on "click to reset" button.

ROC3/ROC4

  • Type "reboot" in the portserver terminal window.
  • If doing above doesn't help then go to HALL-A tools screen on hacsbc2 (left-hand side of shift leader's computer)
  • Under "MISCELLANEOUS" section click on "Crate Resets" and under "Resets from the Hadron Detector Stack (left) Crate" look for SFI (Fastbus ROC 3 & ROC 4) #1 and click on "click to reset" button.

TS11

  • Type "reboot" in the portserver terminal window.
  • If doing above doesn't help then go to HALL-A tools screen on hacsbc2 (left-hand side of shift leader's computer)
  • Under "MISCELLANEOUS" section click on "Crate Resets" and under "Resets from the Hadron Detector Stack (left) Crate" look for Trigger Supervisor and click on "click to reset" button.

TS1

  • Type "reboot" in the portserver terminal window
  • If doing above doesn't help then direct a webbrowser to hareboot30, and perform an "Immediate Reboot" for Outlet 1.
  • The password is located near the white board.

ROC5

  • Type "reboot" in the portserver terminal window
  • If doing above doesn't help then direct a webbrowser to hareboot28, and perform an "Immediate Reboot" for the switch labeled bbvme1 ROC5 on Outlet 1.
  • The password is located near the white board.

ROC8/ROC9/ROC10

  • Type "reboot" in the portserver terminal window. If it doesn't work then
  • Log into an adaq machine using the adaq account... e.g.
[adaq@adaql4 adaq]$ ssh adaq@adaql1

Run "crate_reset roc8" for example to reset roc8 

[adaq@adaql1 adaq]$ crate_reset
USAGE: /adaqfs/home/adaq/brad/camac_control/crate_reset [options] <rocID> [<rocID> ... ]
  -v     verbose.
  -h     This help text.
---
 rocID   Channel   Description
 -----   -------   -----------
 roc10     10      Lower FASTBUS TDC crate
 roc8       8      FASTBUS ADC crate
 roc9       9      Upper FASTBUS TDC crate
 ts2        2      Hadron Trigger Supervisor
---
 Using controller IP: bbcamac1.jlab.org.  I/O reg in slot 11
 Using cnaf command:  './cnafb'

If you get :

  1. CMD:ERR

type in CAEN to access the menu

Retrieved from "https://hallaweb.jlab.org/wiki/index.php?title=Remote_Crate_Resets&oldid=9124"