Difference between revisions of "G2pmagnets"
From Hall A Wiki
Line 8: | Line 8: | ||
SPECTROMETERS | SPECTROMETERS | ||
− | *The correct “tune” for the spectrometers is “g2p/Gep_1” which you’ll see on the regulator | + | *The correct “tune” for the spectrometers is “g2p/Gep_1” which you’ll see on the regulator controls page (The button to the right of GeV/c after the P0 set box). This determines the quadrupole and dipole settings for the spectrometer proper. |
− | controls page (The button to the right of GeV/c after the P0 set box). This determines the | + | |
− | quadrupole and dipole settings for the spectrometer proper. | + | |
*Make sure the regulator is ON during normal running. | *Make sure the regulator is ON during normal running. |
Revision as of 14:45, 13 April 2012
SEPTA
- There is no “regulator” on the septum magnets. You must set each one manually.
- DO NOT USE "Septum Ramp Controls".
- Use Septum Right Controls for the right side
- Use Septum Left Controls for the left side
- Use "~adaq/bin/GetSeptaCurrent <P0>" to calculate the current for P0 in GeV.
SPECTROMETERS
- The correct “tune” for the spectrometers is “g2p/Gep_1” which you’ll see on the regulator controls page (The button to the right of GeV/c after the P0 set box). This determines the quadrupole and dipole settings for the spectrometer proper.
- Make sure the regulator is ON during normal running.