Difference between revisions of "Polhe3 item material list"
From Hall A Wiki
| Line 17: | Line 17: | ||
** http://hallaweb.jlab.org/equipment/targets/polhe3/lab/optics/PO07-P0522.pdf | ** http://hallaweb.jlab.org/equipment/targets/polhe3/lab/optics/PO07-P0522.pdf | ||
** http://hallaweb.jlab.org/equipment/targets/polhe3/lab/optics/PO07-P0523.pdf | ** http://hallaweb.jlab.org/equipment/targets/polhe3/lab/optics/PO07-P0523.pdf | ||
| + | |||
| + | * oven paint, high temp flat black spray paint http://www.amazon.com/Rust-Oleum-248903-Automotive-12-Ounce-Degree/dp/B003CT4AKC/ref=pd_sim_hi_2/175-1103243-0227261 | ||
Revision as of 11:30, 19 December 2012
- Oven Body Material: Ceramics
- Calcium Silicate CS85 (light) http://advancedmaterialscience.com/products/cs85_bnz.html
- Alumina Silicate Lava (heavy) http://graphitestore.com "Alumina plates, rods, tubes" unfired
- RTV, Permatex 26C, pn 81409 High Temp RTV Silicone (Pep Boys).
- Dowel pins needed to attach the bottom plate to the ovens side walls http://www.mcmaster.com/#8446k15/=evgqtp
- UVa used for oven seals, gasket between cell mounting plate and oven bottom: 1/16" thick silicone sheet http://www.mcmaster.com/#standard-silicone-rubber-sheet-gaskets/=euztp5
- Target cell glass properties, GE180 and Corning 1720 http://galileo.phys.virginia.edu/research/groups/spinphysics/glass_properties.html
- Possible epoxy to replace kapton tape for mounting RTDs?? http://www.lakeshore.com/products/cryogenic-accessories/epoxy/Pages/Overview.aspx
- fibers and 5-1 combiner
- oven paint, high temp flat black spray paint http://www.amazon.com/Rust-Oleum-248903-Automotive-12-Ounce-Degree/dp/B003CT4AKC/ref=pd_sim_hi_2/175-1103243-0227261
