Difference between revisions of "BigBite/HVControl"
From Hall A Wiki
(→BigBite High Voltage Control) |
(→BigBite High Voltage Control) |
||
| Line 1: | Line 1: | ||
| − | + | = BigBite High Voltage Control = | |
| − | + | ||
| − | Log | + | == HOWTO start the HV Control GUI == |
| + | * Log into the adev account on adaql2 (password on sheet next to the WhiteBoard). | ||
| + | For example, in an xterm (logged in as adaq@adaql1): | ||
| + | [adaq@adaql1 adaq]$ ssh adev@adaql2 | ||
| + | |||
| + | * Run the GUI: | ||
| + | |||
| + | [adev@adaql2 adev]$ hvgui | ||
| + | |||
| + | * After some time of reading configuration files and information from the HV Crates (about 30 seconds), the GUI should appear: | ||
[[Image:hvgui_example.png]] | [[Image:hvgui_example.png]] | ||
Revision as of 15:40, 30 March 2008
BigBite High Voltage Control
HOWTO start the HV Control GUI
- Log into the adev account on adaql2 (password on sheet next to the WhiteBoard).
For example, in an xterm (logged in as adaq@adaql1):
[adaq@adaql1 adaq]$ ssh adev@adaql2
- Run the GUI:
[adev@adaql2 adev]$ hvgui
- After some time of reading configuration files and information from the HV Crates (about 30 seconds), the GUI should appear:
