Difference between revisions of "Winter 2016 calorimeter calibration (elastic)"
From Hall A Wiki
| Line 1: | Line 1: | ||
Back to [[https://hallaweb.jlab.org/wiki/index.php/Run_Plan_%28DVCS3%29 Winter2016 DVCS run plan]] | Back to [[https://hallaweb.jlab.org/wiki/index.php/Run_Plan_%28DVCS3%29 Winter2016 DVCS run plan]] | ||
| − | + | ||
Need to remove the plastic shield. <br> | Need to remove the plastic shield. <br> | ||
Calorimeter-Target distance =6.2m<br> | Calorimeter-Target distance =6.2m<br> | ||
Revision as of 11:04, 13 February 2016
Back to [Winter2016 DVCS run plan]
Need to remove the plastic shield.
Calorimeter-Target distance =6.2m
Unrastered beam (which means beam current at less than 5 uA).
LHRS in positive polarity.
DAQ: DVCS config, trigger is S0+S2, autovalidation.
angleLHRS= 38.04 [deg]
momentum LHRS= 2.127 GeV
We will take about 1 hour beam with three calorimeter angles: 26.5, 25 and 23.5 deg.
We are going to move the calorimeter and leave the HRS fixed but we could have done the contrary (see table below).
| pHRS [GeV]=2.217 | angleLHRS [deg]=36.80 | minutes to 500 evts per blocs at 10uA=12 | kp [GeV]=3.0 | Q2=2.7585 |
| pHRS [GeV]=2.127 | angleLHRS [deg]=38.04 | minutes to 500 evts per blocs at 10uA=9 | kp [GeV]=3.1 | Q2=2.603 |
| pHRS [GeV]=2.046 | angleLHRS [deg]=39.18 | minutes to 500 evts per blocs at 10uA=6. | kp [GeV]=3.2 | Q2=2.464 |
