Difference between revisions of "RICH pedestal run"

Revision as of 22:45, 13 November 2008

1. login as a-onl@adaql2

2. go to the directory: /adaqfs/home/a-onl/rich/pedestal

3. do the command: ./preped.sh

4. prescale all trigger except T3 and T5

5. run a standard calibration run in TwoArmRICH (comment as RICH pedestal), deadtime should be rather high (80-90%)

6. take about 5000 events

7. login as adaq@adaql2

9. go to the directory: /adaqfs/home/adaq/e06010/rich/leftreplay

10. run analyzer

11. within analyzer lead: .L newdecodeRICH.C

12. then run: newdecodeRICH(####,2000,0,2) where #### = number of the pedestal run

13. go back a-onl@adaql2 in the directory /adaqfs/home/a-onl/rich/pedestal

14. do the command> ./copyped.sh

15. you can now start the production; do not forget to set the prescalers correctly

Revision as of 22:44, 13 November 2008 (view source) Cisbani (Talk \| contribs) (→‎How to take a RICH pedestal run, generate the pedestal file and make them visible to the DAQ) ← Older edit		Revision as of 22:45, 13 November 2008 (view source) Cisbani (Talk \| contribs) (→‎How to take a RICH pedestal run, generate the pedestal file and make them visible to the DAQ) Newer edit →
Line 1:		Line 1:
−	= How to take a RICH pedestal run, generate the pedestal file and make them visible to the DAQ =	+	=== How to take a RICH pedestal run, generate the pedestal file and make them visible to the DAQ ===

	1. login as a-onl@adaql2		1. login as a-onl@adaql2