Difference between revisions of "RICH pedestal run"
(→Geenerate the pedestal files) |
(→Make them visible to the DAQ) |
||
| Line 29: | Line 29: | ||
== Make them visible to the DAQ == | == Make them visible to the DAQ == | ||
| − | 13. go back a-onl@ | + | 13. go back a-onl@adaql6 (or l7) in the directory '''/adaqfs/home/a-onl/rich/pedestal''' |
14. do the command> '''./copyped.sh''' | 14. do the command> '''./copyped.sh''' | ||
Revision as of 04:44, 16 November 2008
How to take a RICH pedestal run, generate the pedestal files and make them visible to the DAQ.
Take the RICH pedestal run
1. login as a-onl@adaql6 (or l7)
2. go to the directory: /adaqfs/home/a-onl/rich/pedestal
3. do the command: ./preped.sh
4. prescale all trigger except T3 and T5
5. run a standard calibration run in TwoArmRICH (comment as RICH pedestal), deadtime should be rather high (80-90%)
6. take at least 2000 events
Geenerate the pedestal files
7. login as adaq@adaql6 (or l7)
9. go to the directory: /adaqfs/home/adaq/e06010/rich/leftreplay
10. run analyzer
11. within analyzer do: .L newdecodeRICH.C+ (note: to speed up the processing, do not forget the + at the end)
12. then run: newdecodeRICH(####,2000,0,2) where #### = number of the pedestal run
Make them visible to the DAQ
13. go back a-onl@adaql6 (or l7) in the directory /adaqfs/home/a-onl/rich/pedestal
14. do the command> ./copyped.sh
15. you can now start the production; do not forget to set the prescalers correctly
Back to the Left RICH page
