Difference between revisions of "Meeting 2019 03 28"
From Hall A Wiki
(→Update on UVa GEM commissioning (Kondo)) |
(→Update on UVa GEM commissioning (Kondo)) |
||
| Line 11: | Line 11: | ||
- HV test OK for the module with gas connector fix: | - HV test OK for the module with gas connector fix: | ||
- Drawing of the backplanes support on the Alu frames: [[Media:20190324 sketch backplane support.pdf|20190324 sketch backplane support.pdf]] | - Drawing of the backplanes support on the Alu frames: [[Media:20190324 sketch backplane support.pdf|20190324 sketch backplane support.pdf]] | ||
| − | - Modification of the GEM frames: | + | - Modification of the GEM frames: make some clearance for the plastic screws supporting the divider. The job is with the Machine shop |
- Identify with Bogdan some counters that we will use to trigger our cosmics - Need someone for the test of the divider and PMT for these modules with the help from Bogdan | - Identify with Bogdan some counters that we will use to trigger our cosmics - Need someone for the test of the divider and PMT for these modules with the help from Bogdan | ||
- | - | ||
Revision as of 18:56, 27 March 2019
GMn GEM commissioning Meetings: Thursday 9:00am - 10:00pm
Link to all previous meetings: GMn GEM Commissioning Meeting
Kondo, ...
Contents
Update on UVa GEM commissioning (Kondo)
- Short update
- Status of the HDMI cables: Short cables (1m, 2m, 3m) delivered == still testing the long cables, we will procure a set of long cheap (UVa cables) for the second layer and and a few MONOPRICE cables to test on one module .. - HV test OK for the module with gas connector fix: - Drawing of the backplanes support on the Alu frames: 20190324 sketch backplane support.pdf - Modification of the GEM frames: make some clearance for the plastic screws supporting the divider. The job is with the Machine shop - Identify with Bogdan some counters that we will use to trigger our cosmics - Need someone for the test of the divider and PMT for these modules with the help from Bogdan -
