Difference between revisions of "Documentation of SBS-offline"
From Hall A Wiki
(→Getting the code and building the program) |
(→Useful links) |
||
| Line 27: | Line 27: | ||
*[http://git-scm.com/documentation Git Documentation] | *[http://git-scm.com/documentation Git Documentation] | ||
*[https://github.com/JeffersonLab/SBS-offline Github.com] homepage for g4sbs | *[https://github.com/JeffersonLab/SBS-offline Github.com] homepage for g4sbs | ||
| + | *[https://github.com/JeffersonLab/analyzer Github.com] and [https://redmine.jlab.org/projects/podd/wiki wiki] homepages for the analyzer | ||
Revision as of 15:10, 26 February 2020
Contents
Documentation of SBS-offline: Overview
This page is maintained by the UConn group (Eric Fuchey + Andrew Puckett) and as of February 14, 2020 is specific to the master branch of SBS-offline on github.
Purpose
This page documents the SBS-offline program code, which purpose is to perform the data analysis for the upcoming SBS experiments.
Getting the code and building the program
Prerequisites
- Working ROOT installation. libsbsdig is compatible with ROOT version 5 and ROOT version 6. ROOT 6 is strongly recommended
- Working analyzer built with cmake. for that purpose, refer to the instruction below.
Instructions for analyzer installation compatible with cmake
clone the analyzer repository from:
* git clone git@github.com:JeffersonLab/analyzer.git
build it with cmake following the instructions at:
* https://github.com/JeffersonLab/analyzer#compiling-with-cmake
2 precisions:
- it seems that in these instructions the "build" directory has to be in the analyzer directory.
- for your environment settings, in addition to the two lines mentionned in the instructions, you still want to define ANALYZER as the path to your install directory e.g.
* setenv ANALYZER $HOME/local/analyzer
Useful links
- Git Documentation
- Github.com homepage for g4sbs
- Github.com and wiki homepages for the analyzer
