Difference between revisions of "Remote Crate Resets"
From Hall A Wiki
(New page: There are a few ways to reboot the BigBite DAQ crates (TS12, ROC5, ROC6, ROC7, ROC9, ROC10). ===ROC3/ROC4=== * Type "reboot" in the portserver terminal window. * If doing above doesn't ...) |
|||
| Line 1: | Line 1: | ||
There are a few ways to reboot the BigBite DAQ crates (TS12, ROC5, ROC6, ROC7, ROC9, ROC10). | There are a few ways to reboot the BigBite DAQ crates (TS12, ROC5, ROC6, ROC7, ROC9, ROC10). | ||
| + | |||
| + | ===ROC1/ROC2=== | ||
| + | |||
| + | * Type "reboot" in the portserver terminal window. | ||
| + | * If doing above doesn't help then go to HALL-A tools screen on shift leader's computer | ||
| + | * Under "MISCELLANEOUS" section click on "crate_reset" and select "beamline crate_reset", then look for LHRS ROC3/ROC4 and click on "click reset" button. | ||
===ROC3/ROC4=== | ===ROC3/ROC4=== | ||
| Line 14: | Line 20: | ||
* Type "reboot" in the portserver terminal window | * Type "reboot" in the portserver terminal window | ||
* Direct a webbrowser to [http://hareboot26 hareboot26], and perform an "Immediate Reboot" for the switch labeled ''ROC5 - bbvme1''. | * Direct a webbrowser to [http://hareboot26 hareboot26], and perform an "Immediate Reboot" for the switch labeled ''ROC5 - bbvme1''. | ||
| − | |||
| − | |||
| − | |||
| − | |||
=== ROC8/ROC9/ROC10 === | === ROC8/ROC9/ROC10 === | ||
| Line 34: | Line 36: | ||
roc8 8 FASTBUS ADC crate | roc8 8 FASTBUS ADC crate | ||
roc9 9 Upper FASTBUS TDC crate | roc9 9 Upper FASTBUS TDC crate | ||
| − | ts2 2 | + | ts2 2 Hadron Trigger Supervisor |
--- | --- | ||
Using controller IP: bbcamac1.jlab.org. I/O reg in slot 11 | Using controller IP: bbcamac1.jlab.org. I/O reg in slot 11 | ||
Using cnaf command: './cnafb' | Using cnaf command: './cnafb' | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
If you get : | If you get : | ||
Revision as of 10:17, 2 February 2011
There are a few ways to reboot the BigBite DAQ crates (TS12, ROC5, ROC6, ROC7, ROC9, ROC10).
Contents
ROC1/ROC2
- Type "reboot" in the portserver terminal window.
- If doing above doesn't help then go to HALL-A tools screen on shift leader's computer
- Under "MISCELLANEOUS" section click on "crate_reset" and select "beamline crate_reset", then look for LHRS ROC3/ROC4 and click on "click reset" button.
ROC3/ROC4
- Type "reboot" in the portserver terminal window.
- If doing above doesn't help then go to HALL-A tools screen on shift leader's computer
- Under "MISCELLANEOUS" section click on "crate_reset" and select "beamline crate_reset", then look for LHRS ROC3/ROC4 and click on "click reset" button.
TS12
- Type "reboot" in the portserver terminal window
- Direct a webbrowser to hareboot30, and perform an "Immediate Reboot".
ROC5
- Type "reboot" in the portserver terminal window
- Direct a webbrowser to hareboot26, and perform an "Immediate Reboot" for the switch labeled ROC5 - bbvme1.
ROC8/ROC9/ROC10
- Type "reboot" in the portserver terminal window. If it doesn't work then
- Log into an adaq machine using the adaq account... e.g.
[adaq@adaql4 adaq]$ ssh adaq@adaql1
Run "crate_reset roc8" for example to reset roc8
[adaq@adaql1 adaq]$ crate_reset USAGE: /adaqfs/home/adaq/brad/camac_control/crate_reset [options] <rocID> [<rocID> ... ] -v verbose. -h This help text. --- rocID Channel Description ----- ------- ----------- roc10 10 Lower FASTBUS TDC crate roc8 8 FASTBUS ADC crate roc9 9 Upper FASTBUS TDC crate ts2 2 Hadron Trigger Supervisor --- Using controller IP: bbcamac1.jlab.org. I/O reg in slot 11 Using cnaf command: './cnafb'
If you get :
- CMD:ERR
type in CAEN to access the menu
