Difference between revisions of "Remote Crate Resets"

Revision as of 11:10, 2 February 2011

There are a few ways to reboot the BigBite DAQ crates (TS12, ROC5, ROC6, ROC7, ROC9, ROC10).

ROC1/ROC2

• Type "reboot" in the portserver terminal window.
• If doing above doesn't help then go to HALL-A tools screen on shift leader's computer
• Under "MISCELLANEOUS" section click on "crate_reset" and select "beamline crate_reset", then look for LHRS ROC3/ROC4 and click on "click reset" button.

ROC3/ROC4

• Type "reboot" in the portserver terminal window.
• If doing above doesn't help then go to HALL-A tools screen on shift leader's computer
• Under "MISCELLANEOUS" section click on "crate_reset" and select "beamline crate_reset", then look for LHRS ROC3/ROC4 and click on "click reset" button.

TS12

• Type "reboot" in the portserver terminal window
• Direct a webbrowser to hareboot30, and perform an "Immediate Reboot".

ROC5

• Type "reboot" in the portserver terminal window
• Direct a webbrowser to hareboot30, and perform an "Immediate Reboot" for the switch labeled ROC5 - bbvme1.

ROC8/ROC9/ROC10

• Type "reboot" in the portserver terminal window. If it doesn't work then
• Log into an adaq machine using the adaq account... e.g.

[adaq@adaql4 adaq]$ ssh adaq@adaql1

Run "crate_reset roc8" for example to reset roc8

[adaq@adaql1 adaq]$ crate_reset
USAGE: /adaqfs/home/adaq/brad/camac_control/crate_reset [options] <rocID> [<rocID> ... ]
  -v     verbose.
  -h     This help text.
---
 rocID   Channel   Description
 -----   -------   -----------
 roc10     10      Lower FASTBUS TDC crate
 roc8       8      FASTBUS ADC crate
 roc9       9      Upper FASTBUS TDC crate
 ts2        2      Hadron Trigger Supervisor
---
 Using controller IP: bbcamac1.jlab.org.  I/O reg in slot 11
 Using cnaf command:  './cnafb'

If you get :

1. CMD:ERR

type in CAEN to access the menu