Difference between revisions of "Gemeel122 log 375"

From Hall A Wiki
Jump to: navigation, search
Line 42: Line 42:
 
|-
 
|-
 
| 391 || Ped || Mar 10 2011  ||  ||  || 0V ||  || Pedestal for Ch 1,2 and 3. Need to study
 
| 391 || Ped || Mar 10 2011  ||  ||  || 0V ||  || Pedestal for Ch 1,2 and 3. Need to study
 +
|-
 +
|  406  ||Ped  || Mar 15 2011    ||  ||  ||  ||  || Pedestal look ok. RMS is small again. [[https://hallaweb.jlab.org/wiki/index.php/Image:Ped_rms_406.gif]]
 
|-
 
|-
 
|    ||  ||      ||  ||  ||  ||  ||  
 
|    ||  ||      ||  ||  ||  ||  ||  

Revision as of 16:21, 15 March 2011

RUN # Source/Cosmic/Pedestal Date Start Time End Time HV # of events notes
376 Pedestal Mar 9 2011 11:19:40 11:20:30 3.8V 1593 Chamber 1, problem with Y pedestals
377 Pedestal Mar 9 2011 3.8V junk, Do not see Y signals on the scope
378 Pedestal Mar 9 2011 3.8V junk, try changing board for Y readout.
379 Mar 9 2011 3.8V junk
380 Mar 10 2011 3.8V junk while fixing problem. Not clear what the fix was. Maybe the connecting cable between gassiplex boards was not connected securely
381 Mar 10 2011 3.8V junk, low voltage off!
382 Mar 10 2011 3.8V junk, low voltage off!
383 Ped Mar 10 2011 3.8V Good pedestal Chamber 1
384 Cosmic Mar 10 2011 3.8V Tried 55Fe source. Not good
385 Cosmic Mar 10 2011 3.8V 90Sr source, center of chamber 1
386 Cosmic Mar 10 2011 3.8V 90Sr source, move around chamber 1
387 Cosmic Mar 10 2011 15:03 3.86V 90Sr source, move around chamber 1
388 Ped Mar 10 2011 3.86V adjusted Ch 3 amplifier DC offset
389 Ped Mar 10 2011 3.86V Noticed ch 3 Y threshold had a gap
390 Ped Mar 10 2011 0V Connect up Chamber 2, play with DC offset for Ch 2
391 Ped Mar 10 2011 0V Pedestal for Ch 1,2 and 3. Need to study
406 Ped Mar 15 2011 Pedestal look ok. RMS is small again. [[1]]