Difference between revisions of "Solgemc installation outside JLAB"

Revision as of 15:05, 16 May 2011

by Rich Holmes

I have been working on getting the Geant4 simulation and related software up and running on a non JLAB system; here are some notes on what I needed to do. I may be omitting some steps here and I definitely have rearranged the order and left out some steps that I tried but that didn't seem to give useful results, so there are no guarantees this will work for anyone else, but it should cut down on confusion, or so I hope.

The target system for now is one running CentOS 5.6 (32 bit i386), newly installed. Install developer packages, of course.

scons

1. go to http://rpm.pbone.net and search for scons. I find a link for RH EL5 i386 version 1.2.0. This is an older version but it's what's on ifarml6. Install with rpm.

Qt4

1. sudo rpm -ivh http://software.freivald.com/centos/software.freivald.com-1.0.0-1.noarch.rpm
2. sudo yum update fontconfig fontconfig-devel qt4 qt4-devel (Not sure all those are required)

ROOT

1. Install ROOT as usual from source; use configure --enable-qt --enable-qtgsi

gemc

1. sudo rpm -ivh http://www.jlab.org/12gev_phys/RPMS/noarch/jlab-phys-1.3-1.noarch.rpm
2. sudo yum install gemc-jlab
3. Note that it appears one must work in (t)csh to run gemc. Irritating — I prefer bash — but that's life. To facilitate modifications, copy to user directory and work with that: cp -rp /usr/local/jlab_software ~/
4. svn checkout https://clas12svn.jlab.org/repos/trunk/clas12/scons_scripts/
5. setenv JLAB_ROOT ~/jlab_software
6. Edit ~/jlab_software/ce/osrelease.pl. Add a test for CentOS 5.6 in the obvious place.
7. sudo ln -s ~/jlab_software/Linux_RHEL5-i686-gcc4.1.2 ~/jlab_software/Linux_CentOS5.6-i686-gcc4.1.2 See below for continuation of gemc installation

solgemc

1. svn checkout https://jlabsvn.jlab.org/svnroot/solid/solgemc See below for continuation of solgemc installation
2. from launchpad.net/scons-qt4, download, put in ~/solgemc/site_scons/site_tools/qt4

gemc continued

1. cp -rp ~/solgemc/site_scons ~/jlab_software/Linux_CentOS5.6-i686-gcc4.1.2/gemc
2. Edit ~/jlab_software/Linux_CentOS5.6-i686-gcc4.1.2/gemc/SConstruct: copy the env.Library line at the end, paste, and replace env.Library with env.SharedLibrary
3. cd ~/jlab_software/Linux_CentOS5.6-i686-gcc4.1.2/gemc
4. scons
5. sudo chcon -t texrel_shlib_t ~/jlab_software/Linux_CentOS5.6-i686-gcc4.1.2/gemc/libgemc.so to avoid an error caused by selinux

solgemc continued

1. Edit ~/solgemc/solgemc_env.csh:
   1. Comment out set UNAME... and following test for 64 bit
   2. Add unsetenv JLAB_ROOT and unsetenv JLAB_ROOT_ARCH
   3. Add setenv JLAB_ROOT ~/jlab_software/ and setenv JLAB_ROOT_ARCH $JLAB_ROOT/Linux_CentOS5.6-i686-gcc4.1.2/
   4. Add or change setenv GEMC $JLAB_ROOT_ARCH/gemc and setenv GEMC_EVIO2ROOT $JLAB_ROOT_ARCH/bin and setenv GEMC_HOST 127.0.0.1 and setenv GEMC_USER soliduser
   5. Change setenv G4INSTALL $JLAB_ROOT_ARCH/geant4/4.9.3.p02
   6. Comment out source $G4INSTALL/env.csh and add source $JLAB_ROOT/ce/jlab.csh
   7. Change setenv QTDIR /usr/lib/qt4
   8. Change setenv EVIO $JLAB_ROOT_ARCH/evio
   9. Change set PYTHONADD=~/scons_scripts
2. To test, set up mysql tunneling. In runnewbaf_solgemc.sh comment out first command and uncomment second, change -N to 10000, then run this. I get a memory allocation crash at the end but the output file is written.

banks

1. svn checkout http://clas12svn.jlab.org/repos/trunk/clas12/banks into ~/solgemc/
2. unpack tarball sent by Seamus, copy src/example4.cc to ~/solgemc/banks/src/
3. cp -rp ~/solgemc/site_scons ~/solgemc/banks
4. ln -s /usr/local/root ~/jlab_software/Linux_CentOS5.6-i686-gcc4.1.2/root/5.28
5. Edit ~/jlab_software/ce/root.env to replace root/lib/root with root/lib (In a standard ROOT install the libraries are in /usr/local/root/lib, not /usr/local/root/lib/root. However this turns out not to be enough, so we kludge a fix:)
6. ln -s /usr/local/root/lib /usr/local/root/lib/root
7. cd ~/solgemc/banks
8. edit src/bank.cc to replace db.setUserName("clasuser"); with db.setUserName("soliduser"); db.setPassword("ilovesolid");
9. scons

event generator

1. svn co 'http://jlabsvn.jlab.org/svnroot/solid/evgen'
2. follow install instructions for eicRate_20101102 but I needed to add -L /home/$(USER)/lib in definition of GLIBS in Makefile.arch).

root2lund

1. follow install instructions for root2lund. Did not need any environment variable changes.