Difference between revisions of "G2pmagnets"
From Hall A Wiki
Line 1: | Line 1: | ||
SEPTA | SEPTA | ||
− | *There is no | + | *There is no regulator on the septum magnets. You must set each one manually to match the spectrometer dipole setting. |
− | *Use | + | *Use <I>Septum Right Controls</I> and <I>Septum Left Controls</I>. DO NOT USE <I>Septum Ramp Controls</I>. |
− | * | + | *Type "<B>~adaq/bin/GetSeptaCurrent <P0></B>" on any adaq machine to calculate the necessary septa current. |
<br> | <br> | ||
Revision as of 14:56, 13 April 2012
SEPTA
- There is no regulator on the septum magnets. You must set each one manually to match the spectrometer dipole setting.
- Use Septum Right Controls and Septum Left Controls. DO NOT USE Septum Ramp Controls.
- Type "~adaq/bin/GetSeptaCurrent <P0>" on any adaq machine to calculate the necessary septa current.
SPECTROMETERS
- The correct “tune” for the spectrometers is “g2p/Gep_1” which you’ll see on the regulator controls page (The button to the right of GeV/c after the P0 set box). This determines the quadrupole and dipole settings for the spectrometer proper.
- Make sure the regulator is ON during normal running.