Difference between revisions of "NaI calibration"
(→Block position) |
|||
| Line 115: | Line 115: | ||
HistoPos.C uses eventlist on 1306 to fill position histogran | HistoPos.C uses eventlist on 1306 to fill position histogran | ||
| + | |||
| + | ==Channel to HV and ADC functions== | ||
| + | /adaqfs/home/adaq/e05110/HV/c | ||
| + | |||
| + | CSRmap.C must be loaded compiled | ||
Revision as of 23:49, 3 November 2007
L HRS Run Number And NaI H/V
1286: -1200V
1287: -1400V
1288: -1500V
1289: -1500V , S2 4,5,6 Off
1304,1305: -1700V
| +Run | HV | momentum | short replay | long replay |
|---|---|---|---|---|
| 1285 | -1200 | 1.0 | 1 | |
| 1286 | -1200 | 1.0 | 1 | |
| 1287 | -1400 | 1.0 | 1 | |
| 1288 | -1500 | 1.0 | 1 | |
| 1289 | -1500 | 1.0 | 1 | |
| 1304 | -1700 | 1.0 | 1 | |
| 1305 | -1700 | 1.0 | 1 | |
| 1306 | -1700 | 1.0 | 1 | |
| 1307 | -1700 | 0.5 | 1 | |
| 1308 | -1700 | 0.5 | 1 | |
| 1309 | -1700 | 0.5 Gev | 1 | |
| 1310 | -1700 | 0.5 | 1 | |
| 1311 | -1700 | 0.5 | 1 | |
| 1312 | -1700 | 1 | 1 | |
| 1313 | -1900 | 1.0Gev | 1 | |
| 1314 | -1900 | 1.0Gev | 1 | |
| 1315 | -1900 | 1.0Gev | 1 | |
| 1316 | -1900 | 1.0Gev | 1 | |
| 1317 | -1900 | 1 | 1 | |
| 1318 | -1900 | 1 | 1 | |
| 1319 | -1900 | 1 | 1 | |
| 1326 | -1900 | 1.0Gev | 1 | |
| 1332 | -2000 | 0.5Gev | 1 | 1 |
| 1333 | -2100 | 0.5Gev | 1 | |
| 1334 | -2100 | 0.5Gev | 1 | |
| 1335 | -2100 | 0.5Gev | 1 | |
| 1336 | -2100 | 0.5Gev | 1 | |
| 1337 | -2100 | 0.2Gev | 1 | |
| 1442 | -1000 | 1 | 1 | |
| 1443 | -1000 | 1 | 1 | |
| 1444 | -1000 | 1 | 1 | |
| 1445 | - 600 | 1 | 1 | |
| 1446 | - 600 | 1 | 1 |
ls /adaql10/work1/E05110/onlroot/*full*
Macros
replayFull.C : replay with another filename and reduced set of variable for replay of complete runs
remark the histogram are saved in the last root file, I made a configuration CSR3p to look at those with the online.C+
~/e05110/HV/c/allhv.sh : get the values from the HV crate and put them into a file in format channe hv
~/e05110/onlana/camsonne/number.sh :simple script to generate a HV file with one value
~/e05110/onlana/findpeak.C : use macro peak search class to find the edge for calibration
/adaqfs/home/adaq/e05110/onlana/camsonne/yoomin : contains map HV to
Run 1306
Block position
macro to generate the event list : amplitudes bigger than 200 above pedestal
Blocks which have reasonable amplitude 12,13,14,16,21,22,24,29,33,40,42,44,47,48,50,51,55,56,57,58,60,65,67,75,76,77,78,83, 85,86,87,92,93,94,95,96,101,102,103,104,105,111,112,114,115,119,120, 121,122,123,126,129,130,131,137,138,139,140,146,147,148,150,157,159,165,166,167, ,168,173,174,175,177,182,183,184,185,186,191,192,193,194,195,200, 201,203,204,209,210,211,212,213,218,231,237,246,248,249,256,258
HistoPos.C uses eventlist on 1306 to fill position histogran
Channel to HV and ADC functions
/adaqfs/home/adaq/e05110/HV/c
CSRmap.C must be loaded compiled
