Difference between revisions of "BigBite/HVControl"
From Hall A Wiki
(→HOWTO change high voltage) |
(→HOWTO start the HV Control GUI) |
||
| Line 14: | Line 14: | ||
[[Image:hvgui_example.png]] | [[Image:hvgui_example.png]] | ||
| + | |||
| + | |||
| + | * bbps1 S0 to S9 are E and DE BB planes | ||
| + | * bbps1 S14 to S15 Bigbite MWDC HV | ||
== HOWTO change high voltage == | == HOWTO change high voltage == | ||
Revision as of 23:46, 31 March 2008
Contents
BigBite High Voltage Control
HOWTO start the HV Control GUI
- Log into the adev account on adaql2 (password on sheet next to the WhiteBoard).
For example, in an xterm (logged in as adaq@adaql1):
[adaq@adaql1 adaq]$ ssh adev@adaql2
- Run the GUI:
[adev@adaql2 adev]$ hvgui
- After some time of reading configuration files and information from the HV Crates (about 30 seconds), the GUI should appear:
- bbps1 S0 to S9 are E and DE BB planes
- bbps1 S14 to S15 Bigbite MWDC HV
HOWTO change high voltage
- double click the slot you want to change in Target_V column
- change the value then hit enter
- after finish changing please save the setting
HOWTO save high voltage setting
- click File
- choose Save Voltage Set
- please save the file in the format as you see in the example
BB_month_date_year_time.set
