Difference between revisions of "Online scaler rates - xscaler"
From Hall A Wiki
| Line 3: | Line 3: | ||
* If it is xscaler is not open then follow these instructions: | * If it is xscaler is not open then follow these instructions: | ||
| − | |||
* login as '''a-onl''' on '''adaql1''' or '''adaql2''' machines (eg: "'''ssh a-onl@adaql1'''" ) | * login as '''a-onl''' on '''adaql1''' or '''adaql2''' machines (eg: "'''ssh a-onl@adaql1'''" ) | ||
Revision as of 14:15, 21 March 2014
- Raw rates of trigger and detector channels can be accessed using a GUI. Below are the instructions for opening "xscaler" GUI
- These screens are generally already open on the agen5 machine (above the DAQ machine)
- If it is xscaler is not open then follow these instructions:
- login as a-onl on adaql1 or adaql2 machines (eg: "ssh a-onl@adaql1" )
- passwords are written on a note and available in the counting house
- type "goxscaler" and follow the instructions printed on the screen
- type "./xscaler Left" or "./xscaler Right" to access xscaler display
- Select the "Trig-Cher-S0" tab on the top of the window
