Difference between revisions of "PortSever and CPU Programming"
From Hall A Wiki
| Line 1: | Line 1: | ||
1. find the PortServer name, ( left HRS hatsv4 , Right HRS hatsv3, Bigbite Tlab : bbts-tlab ) | 1. find the PortServer name, ( left HRS hatsv4 , Right HRS hatsv3, Bigbite Tlab : bbts-tlab ) | ||
| − | 2. connect to the PortServer, specifying the exact port e.g. | + | 2. connect to the PortServer, specifying the exact port, e.g. |
telnet bbts-tlab 2002 | telnet bbts-tlab 2002 | ||
| − | 3. Inside the PortServer, look for the CPU by pressing 'return'; You should see | + | 3. Inside the PortServer, look for the CPU by pressing 'return'; You should see, e.g. |
[VxWorks] | [VxWorks] | ||
| Line 14: | Line 14: | ||
* Type 'c' to change boot parametes | * Type 'c' to change boot parametes | ||
| + | |||
| + | * Type '?' for printing the list of available commands | ||
* Type '@' to boot (load & go) | * Type '@' to boot (load & go) | ||
| − | + | ||
| + | |||
| + | boot device : dc | ||
| + | unit number : 0 | ||
| + | processor number : 0 | ||
| + | host name : srcdaq | ||
| + | file name : /pub/kern/5.5/vx2400_v2 | ||
| + | inet on ethernet (e) : 129.57.36.180 | ||
| + | host inet (h) : 129.57.37.93 | ||
| + | gateway inet (g) : 129.57.36.1 | ||
| + | user (u) : anonymous | ||
| + | ftp password (pw) : anonymous | ||
| + | flags (f) : 0x20 | ||
| + | target name (tn) : bbsfi1-tlab | ||
| + | startup script (s) : /home/a-onkl/bbite/vxworks/bbts1.boot | ||
| + | |||
| + | |||
[[http://hallaweb.jlab.org/wiki back to Hall A wiki]] | [[http://hallaweb.jlab.org/wiki back to Hall A wiki]] | ||
Revision as of 14:43, 13 February 2015
1. find the PortServer name, ( left HRS hatsv4 , Right HRS hatsv3, Bigbite Tlab : bbts-tlab )
2. connect to the PortServer, specifying the exact port, e.g.
telnet bbts-tlab 2002
3. Inside the PortServer, look for the CPU by pressing 'return'; You should see, e.g.
[VxWorks]
4. The telnet functionality is very simple:
- Type 'p' to print boot parameters
- Type 'c' to change boot parametes
- Type '?' for printing the list of available commands
- Type '@' to boot (load & go)
boot device : dc unit number : 0 processor number : 0 host name : srcdaq file name : /pub/kern/5.5/vx2400_v2 inet on ethernet (e) : 129.57.36.180 host inet (h) : 129.57.37.93 gateway inet (g) : 129.57.36.1 user (u) : anonymous ftp password (pw) : anonymous flags (f) : 0x20 target name (tn) : bbsfi1-tlab startup script (s) : /home/a-onkl/bbite/vxworks/bbts1.boot
