Difference between revisions of "PortSever and CPU Programming"
From Hall A Wiki
| Line 5: | Line 5: | ||
telnet bbts-tlab 2002 | telnet bbts-tlab 2002 | ||
| − | 3. Inside the PortServer, look for the CPU by pressing 'return'; You should see, e.g. | + | 3. Inside the PortServer, look for the CPU by pressing 'return'; You should see, e.g. type your command at |
[VxWorks] | [VxWorks] | ||
| − | |||
4. The PortServer functionality is very simple: | 4. The PortServer functionality is very simple: | ||
Revision as of 14:59, 13 February 2015
1. find the PortServer name, ( Left HRS hatsv4 , Right HRS hatsv3, Bigbite Tlab : bbts-tlab )
2. connect to the PortServer, specifying the exact port, e.g.
telnet bbts-tlab 2002
3. Inside the PortServer, look for the CPU by pressing 'return'; You should see, e.g. type your command at
[VxWorks]
4. The PortServer functionality is very simple:
- Type 'p' to print boot parameters
- Type 'c' to change boot parametes
- Type '@' to boot (load & go)
- Type '?' for printing the list of available commands
- Delete by using 'ctrl+h'
Spectrometers PortServer Definitions
