Difference between revisions of "Running GSIM CLAS simulation"

Revision as of 10:37, 12 April 2015

GSIM Inventory

• GSIM HomePage

• GSIM directory is to be located on the farm, at a large enough work disk. An example of the simulation inventory can be found at

 /work/halla/e07006/disk1/Erez/gsim  (will be used for the remainder of the documentation as $GSIM)

• To get directly to the GSIM location an alias was set, so simply type

 GoGSIM

Running GSIM

Setting an Event Generator and create events file

• The simple kinematic event generator we use at TAU is based on actual data:

e-e'p events in which 1 proton was detect serve as baseline to generation of a second proton, using the c.m. kinematics calculation

• For jets/showers, PYTHIA and Lepto64 are used as the base-line event generator for GSIM

• The existing EG is a ROOT macro located under $GSIM/EventGenerator/ directory.

Setting Event Generator

• The EG should be modified for the specific solid target. An example for 12C can be found at

 $GSIM/EventGenerator/eep_EG.C

Generate the Events

• To build the event generator use the build compilation command, e.g.

 root -l  eep_EG.C

(the result: an executable event generator e.g. lepto_exe/LeptoC.exe)

Look at the generated distributions

• A utility for observing the generated data exist in the main EG directory $GSIM/EventGenerator/LeptoRoot

• Port the data file into the utility directory (cp the file to the right location)

• A perl script is used to write it in the right format

 rm data.dat
 ./leptoroot.pl < C.dat > data.dat 

(the result: a different (just numbers) data file data.dat)

• An executable is then used to write the data into a ROOT TTree

 ./leptoroot 

(the result: a ROOT file LeptoRoot/data.root that will enable you to observe the generated distributions)

Converting generated data files to GEANT-3 format input

• port the generated-events data file (in this example C.txt) to the converter utility and convert it. e.g.

 ./txt2part -m -o12_100GeV.evt < 12_100GeV.txt 

(the result: a part file mctk.evt suitable for GSIM)

Running generated events through a CLASS GEANT-3 simulation

running GSIM with the generated events

• port the events file to the shared directory

 mv mctk.evt $GSIM
 GoGSIM

• to run the first XXXX events through the simulation, modify the ffread.in file so that it triggers XXXX events

• then execute the shell script that runs GSIM

 ./gsim_Batch.csh

• or simply use the run command

 RunGSIM

(the result: 2 bos + 1 txt files , gsimtest.txt, gsimtest.bos, gpp_test.bos and the output file outfile1 )

• gsimtest.bos contains the data 'collected' by CLASS (ADC/TDC)

• gpp_test.bos incorporates preprocessing to add smearing of the data

• outfile1 is the physical data after REConstruction SYStem analyzed it

Look at the output files

• using COUNTBS one could count the number of events, e.g.

 ./countbs gsimtest.bos

(Note the first additional two events are header and are not to be accounted)

• using BOSDUMP code, one can look at the data from the terminal, e.g.

 ./bosdump gsimtest.bos
 ./bosdump gpp_test.bos

Converting the GSIM output file to ROOT

• this is the easy part now. For an output file named outfile1 e.g., use

 ./WriteRootDst -o output.root -GSIM outfile1

(the result: a root file /output.root)

Writing the physical tree

• The same way used to write the data file (utilizing write_tree.cxx) an executable is generated from write_simulation.cxx

• write_simulation.cxx, apart from writing the EVNT bank data, also writes GSIM data

• An example can be found at /u/home/cohen/Clas/WriteTreeEG2

• A soft link is generated at /w/halla-scifs2/e07006/Erez/gsim/simulate/WriteTree so the only thing ones has to type is

 write_simulation

Observing the output ROOT TTree

• The ROOT TTree is called

 CLASEVENT

• To look at the data use e.g.

 CLASEVENT -> StartViewer()

• The 'collected data' is stored in EVNT.XXXX variables, while the generated data is stored in GSIM.XXXX variables.

Running GSIM in interactive mode

• follow the steps up to ./gsim_test.csh (without executing the shell script!)

• source the necessary environmental set-ups

 source /group/clas/builds/environment.csh

• run GSIM

 gsim_int -ffread ffread.in -mcin XXXX.evt

(where XXXX.evt is the event file, e.g. mctk.evt)

• inside GSIM you will be prompted to answer a question. disregard it (type \return)

• execute the following commands

 switch 1 2 
 dcut clas 2 0 10 10 0.015 0.015
 trig 1

[back to Tel Aviv University SRC Group]