Difference between revisions of "BigBite DAQ"
(→Start CODA) |
(→V1495 programming) |
||
Line 156: | Line 156: | ||
/home/a-onl/V1495/V1495_User_Demo_QuartusII_Project_2_0/FIT/v1495usr_demo.qpf | /home/a-onl/V1495/V1495_User_Demo_QuartusII_Project_2_0/FIT/v1495usr_demo.qpf | ||
+ | |||
+ | and modify coinc_reference.vhd | ||
+ | |||
+ | To program : | ||
+ | |||
+ | open programmer | ||
+ | |||
+ | and hit start button after compilation if needed |
Revision as of 17:09, 16 April 2015
Contents
Main computer in Test Lab
srcdaq
DAQ files are in a-onl account
booting CPU / portserver
portserver bbts-tlab
To connect to a CPU :
telnet bbts-tlab 200x
bbsfi
CPU parameters ROC1
boot device : dc0 processor number : 0 host name : srcdaq file name : /home/a-onl/bbite/vxworks/vx2400_v2 inet on ethernet (e) : 129.57.36.180:fffffc00 inet on backplane (b): host inet (h) : 129.57.37.93 gateway inet (g) : 129.57.36.1 user (u) : a-onl ftp password (pw) (blank = use rsh): flags (f) : 0x20 target name (tn) : bbsfi1-tlab startup script (s) : /home/a-onl/bbite/vxworks/bb_sfi1.boot other (o) :
To reprogram ROC1 bootparameters you can use the python script :
progROC1
it is located in /home/a-onl
CPU parameters ROC2
boot device : dc0 processor number : 0 host name : srcdaq file name : /home/a-onl/bbite/vxworks/vx2400_v2 inet on ethernet (e) : 129.57.36.196:fffffc00 inet on backplane (b): host inet (h) : 129.57.37.93 gateway inet (g) : 129.57.36.1 user (u) : a-onl ftp password (pw) (blank = use rsh): flags (f) : 0x20 target name (tn) : bbsfi2-tlab startup script (s) : /home/a-onl/bbite/vxworks/bb_sfi2.boot other (o) :
CPU parameters Trigger supervisor crate
boot device : dc0 processor number : 0 host name : srcdaq file name : /home/a-onl/bbite/vxworks/vx2400_v2 inet on ethernet (e) : 129.57.37.90:fffffc00 inet on backplane (b): host inet (h) : 129.57.37.93 gateway inet (g) : 129.57.36.1 user (u) : a-onl ftp password (pw) (blank = use rsh): flags (f) : 0x20 target name (tn) : intela1n1 startup script (s) : /home/a-onl/bbite/vxworks/bb_ts.boot other (o) :
Fastbus test programs
Location on srcdaq
/home/a-onl/bbite/test/fastbus
To load , type on the CPU :
cd "/home/a-onl/bbite/test/fastbus" ld < test_1877.o test_1877 slot_number
Fastbus detector map
ROC | Slot | Module | Detector | |
---|---|---|---|---|
1 | 9 | 1877 | VDC | |
Fastbus readout lists
Files are located in
/home/a-onl/bbite/crl
there is one file for each ROCs
readout line 1: bb_sfi2(1).o readout line 2: the same event_list_ppc.o
To compile a crl file do :
makelist filename ppc
Fastbus user manual
CODA
coda website
https://coda.jlab.org/drupal/content/install-instructions
Data analyzer
Install root :
https://root.cern.ch/drupal/
Install analyzer :
http://hallaweb.jlab.org/podd/index.html#docs http://hallaweb.jlab.org/podd/download/analyzer-1.5.28.tar.gz
Start CODA
Follow these steps to open the CODA:
1. Open a terminal. 2. Source dosetupcoda. 3. type rcplatform. 4. open other terminal, source dosetupcoda. 5. type codamaster to open other windown. 6. In codamaster has runcontrol used to take data.
V1495 programming
Use the quartus software
/home/a-onl/altera/10.1sp1/quartus/bin/quartus
The fan program is in :
/home/a-onl/V1495/V1495_User_Demo_QuartusII_Project_2_0
Open the project :
/home/a-onl/V1495/V1495_User_Demo_QuartusII_Project_2_0/FIT/v1495usr_demo.qpf
and modify coinc_reference.vhd
To program :
open programmer
and hit start button after compilation if needed