Difference between revisions of "NMR water cell calibration"
From Hall A Wiki
(→Sept 28, 2008 measurement) |
(→Coil Position Survey) |
||
| Line 7: | Line 7: | ||
=== Coil Position Survey === | === Coil Position Survey === | ||
| + | |||
| + | <pre> | ||
| + | All error below is 65% CL static error | ||
| + | |||
| + | Up Stream: | ||
| + | Cell Diameter = 19.27 +/- 0.05 mm | ||
| + | Distance between 2 pick up coil inner surface : 21.31 +/- 0.14 mm | ||
| + | |||
| + | Down Stream: | ||
| + | Cell Diameter = 18.62 +/- 0.03 mm | ||
| + | Distance between 2 pick up coil inner surface : 20.87 +/- 0.07 mm | ||
| + | </pre> | ||
Revision as of 15:50, 29 September 2008
NMR signal to He3 polarization relation is calibrated by water cell test.
Introduction
Sept 28, 2008 measurement
Coil Position Survey
All error below is 65% CL static error Up Stream: Cell Diameter = 19.27 +/- 0.05 mm Distance between 2 pick up coil inner surface : 21.31 +/- 0.14 mm Down Stream: Cell Diameter = 18.62 +/- 0.03 mm Distance between 2 pick up coil inner surface : 20.87 +/- 0.07 mm
