Difference between revisions of "Shielding hut for GEM electronics"

Revision as of 09:37, 8 September 2016

The main purpose of this study to determine the neutron-induced damage on electronics at the shielding hut for GEp.

Few extra details from Alan,

The green boxes are cast steel 52" x 52" x 26".
The distance between two green boxes are 96".
There is a steel plates between two green boxes (bottom-2.5" thick & front-7.5" thick). The bottom plate allows for the front plates to match the height of the green blocks for stacking the top plates.
And there is a steel plate (120" x 5" x 43") on the top (blue).

The drawings for the magnet support frame (by Alan) -

@@ Line 1: / Line 1: @@
 The main purpose of this study to determine the neutron-induced damage on electronics at the shielding hut for GEp.
-. Main drawings for the shielding hut are,
+** Main drawings for the shielding hut are,
 * 12GEp_Elevation [https://userweb.jlab.org/~dasuni/GEM_Electronic_hut/12GEp_Elevation.png]
 * 12GEp_Iso [https://userweb.jlab.org/~dasuni/GEM_Electronic_hut/12GEp_Iso.png]
@@ Line 10: / Line 10: @@
 * The distance between two green boxes are 96".
 * There is a steel plates between two green boxes (bottom-2.5" thick & front-7.5" thick). The bottom plate allows for the front plates to match the height of the green blocks for stacking the top plates.
-* And there is a steel plate (120" x 5" x 43") on the top (blue) which is
+* And there is a steel plate (120" x 5" x 43") on the top (blue).
+The drawings for the magnet support frame (by Alan) -