Difference between revisions of "Solid Detector Dimension"

From Hall A Wiki
Jump to: navigation, search
(→‎SoLID CLEO (based on CLEOv8 field map, updated in 01/30/2015))
(→‎SoLID CLEO (based on CLEOv8 field map, updated in 01/30/2015))
Line 7: Line 7:
 
  coil center at z=0, positive Z axis is going downstream along beam, x and y axis is according to right hand rule.
 
  coil center at z=0, positive Z axis is going downstream along beam, x and y axis is according to right hand rule.
 
= [[Previous Layout]] =
 
= [[Previous Layout]] =
−
== SoLID CLEO (based on CLEOv8 field map, updated in 01/30/2015) ==
+
== SoLID Setup (updated in 201610/28 by Zhiwen Zhao, based on SVN rev1169) ==
−
 
+
−
CLEOv8 field map is based on more realistic design with CLEO-II.
+
−
 
+
−
The magnet and yoke will fit both PVDIS and SIDIS/JPsi configuration.
+
−
 
+
−
The detector has various small change to fit into new design, please refer to the change at slide 7 and 8 of CLEOv8 update
+
−
[http://hallaweb.jlab.org/12GeV/SoLID/download/field/talk/SoLID_CLEO_zwzhao_201207.pptx pptx] [http://hallaweb.jlab.org/12GeV/SoLID/download/field/talk/SoLID_CLEO_zwzhao_201207.pdf pdf]
+
  
 
{| Border = "1"
 
{| Border = "1"
−
! SIDIS/JPsi [[Image:http://hallaweb.jlab.org/12GeV/SoLID/download/sim/setup/SoLID_setup_20160804_SIDIS_He3.png|thumb|200px|center]]
+
! SIDIS/JPsi  
 +
pic:http://hallaweb.jlab.org/12GeV/SoLID/download/sim/setup/SoLID_setup_20160804_SIDIS_He3.pdf
 
| Z center (cm)
 
| Z center (cm)
 
| Z range (cm)
 
| Z range (cm)
Line 27: Line 21:
 
| comment
 
| comment
 
|-
 
|-
−
| target (SIDIS)
+
| target (SIDIS_He3)
 
| -350
 
| -350
 
| (-370,-330)
 
| (-370,-330)
Line 37: Line 31:
 
| Polarized He3
 
| Polarized He3
 
|-
 
|-
−
| target collimator upstream (SIDIS)
+
| target (SIDIS_NH3)
 +
| -350
 +
| (-353,-347)
 +
| 3
 +
| R(0,1)
 +
| 1
 +
|
 +
|
 +
| Polarized NH3
 +
|-
 +
| target (JPsi)
 +
| -315
 +
| (-322.5,-307.5)
 +
| 15
 +
| R(0,1)
 +
| 1
 +
|
 +
|
 +
| LH2
 +
|-
 +
| target collimator upstream (SIDIS_He3)
 
| -355
 
| -355
 
| (-360,-350)  
 
| (-360,-350)  
Line 45: Line 59:
 
|
 
|
 
|
 
|
−
| made of W
+
| made of W powder
 
|-
 
|-
−
| target collimator downstream (SIDIS)
+
| target collimator downstream (SIDIS_He3)
 
| -315
 
| -315
 
| (-320,-310)  
 
| (-320,-310)  
Line 55: Line 69:
 
|
 
|
 
|
 
|
−
| made of W
+
| made of W powder
 
|-
 
|-
 
| GEM 6-planes
 
| GEM 6-planes
Line 170: Line 184:
  
 
{| Border = "1"
 
{| Border = "1"
−
! PVDIS [[Image:solid_CLEO_PVDIS_20120821.png|thumb|200px|center]]
+
! PVDIS  
 +
pic:http://hallaweb.jlab.org/12GeV/SoLID/download/sim/setup/SoLID_setup_20160804_PVDIS.pdf
 
| Z center (cm)
 
| Z center (cm)
 
| Z range (cm)
 
| Z range (cm)
Line 188: Line 203:
 
|
 
|
 
|
 
|
−
|LD2
+
|LD2/LH2
 
|-
 
|-
 
| Baffle 11-layers
 
| Baffle 11-layers
Line 222: Line 237:
 
| forwardangle Calorimeter
 
| forwardangle Calorimeter
 
| 350
 
| 350
−
| (325,375)
+
| (323,373)
 
| 50
 
| 50
 
| (110,265)
 
| (110,265)
Line 232: Line 247:
 
| Space at back
 
| Space at back
 
|
 
|
−
| (370,485)
+
| (373,485)
−
| 115
+
| 112
 
|
 
|
 
|
 
|

Revision as of 19:14, 28 October 2016

Introduction

The SoLID layouts with different configuration are shown here.

The standard setup plot can be download from http://hallaweb.jlab.org/12GeV/SoLID/download/sim/setup/ 

coil center at z=0, positive Z axis is going downstream along beam, x and y axis is according to right hand rule.

Previous Layout

SoLID Setup (updated in 201610/28 by Zhiwen Zhao, based on SVN rev1169)

SIDIS/JPsi

pic:http://hallaweb.jlab.org/12GeV/SoLID/download/sim/setup/SoLID_setup_20160804_SIDIS_He3.pdf

Z center (cm) Z range (cm) Z length (cm) R range (cm) R length (cm) area (m2) weight(metric t) comment
target (SIDIS_He3) -350 (-370,-330) 40 R(0,1) 1 Polarized He3
target (SIDIS_NH3) -350 (-353,-347) 3 R(0,1) 1 Polarized NH3
target (JPsi) -315 (-322.5,-307.5) 15 R(0,1) 1 LH2
target collimator upstream (SIDIS_He3) -355 (-360,-350) 10 Rin(1.3,2.7),Rout(2.6,5.4) made of W powder
target collimator downstream (SIDIS_He3) -315 (-320,-310) 10 Rin(1.3,2.7),Rout(2.6,5.4) made of W powder
GEM 6-planes Z(-175,-150,-119,-68,5,92) 15.525 each Rin(36,21,25,32,42,55), Rout(87,98,112,135,100,123) (41,77,87,103,58,68)
largeangle SPD -65 Z(-66,-64) 2 R (80, 135) 55 3.7
largeangle Calorimeter -35 Z(-62,-12) 50 Rin(83),Rout(137) (50) 3.7 9 (25%lead + 75%scintillator)
lightgas Cherenkov Z(97,194,209,301) 204 Rin(58,65,67,85), Rout(127,144,155,265) (69,79,88,180)
heavygas Cherenkov 351 Z(306,406) 100 Rin(80,94),Rout(265,265) (185,161)
forward SPD 407 Z(406.75,407.25) 0.5 R (96, 210) 114 11
MRPC 410 2.83 R(96,210) 114 11
forwardangle Calorimeter 440 (413,463) 50 (105,240) 135 14.6 23 (25%lead + 75%scintillator) may share supporting with PVDIS FAEC
Space at back (463,485) 22 partially for EC readout
Beamline upstream Z(-675,-375) 300 Rin(1.95,1.95), Rout(2.0,2.0) 0.05
Beamline downstream Z(-325,550) 875 Rin(1.0,18.95),Rout(1.05,19.0) 0.5


PVDIS

pic:http://hallaweb.jlab.org/12GeV/SoLID/download/sim/setup/SoLID_setup_20160804_PVDIS.pdf

Z center (cm) Z range (cm) Z length (cm) R range (cm) R length (cm) area (m2) weight (t) comment
target 10 (-10, 30) 40 (0, 3) 3 LD2/LH2
Baffle 11-layers Z(40,54,68,82,96,110,124,138,152,166,180) 9 per plate Rin(3.90,9.62,15.30,20.92,26.60,32.22,37.90,43.52,49.20,54.82,60.40), Rout(34.70,44.54,54.30,64.01,73.80,83.48,93.30,102.95,112.80,122.43,132.00) 15 New Baffle design
GEM 5-planes Z (157.5,185.5,190,306,315) 1 per plate Rin(48,59,65,105,109),Rout(122,143,143,230,237) (74,84,78,125,128)
lightgas Cherenkov Z(194,209,301) 107 Rin(65,67,85),Rout(144,155,265) (79,88,180)
forwardangle Calorimeter 350 (323,373) 50 (110,265) 155 18.3 34 (25%lead + 75%scintillator) may share supporting with SIDIS FAEC
Space at back (373,485) 112 partially for EC readout
Beamline upstream Z(-675,-15) 650 Rin(1.22,1.22), Rout(1.25,1.25) 0.03
Beamline downstream Z(35,500) 465 Rin(1.4,28.9),Rout(1.5,29.0) 0.1
Retrieved from "https://hallaweb.jlab.org/wiki/index.php?title=Solid_Detector_Dimension&oldid=31244"