Difference between revisions of "RICH Information for experts"
From Hall A Wiki
(→Replay and analize the data) |
|||
| Line 18: | Line 18: | ||
3. when done, exit ''analyzer'' | 3. when done, exit ''analyzer'' | ||
| − | 4. use on the available macros: ''evdisplay.C'' or ''ec_ana.C'' | + | 4. use on the available macros: the old ''evdisplay.C'' or ''ec_ana.C'' which is in progress |
| − | + | ||
| − | + | ||
| − | + | ||
== How to change the delay between trigger (T3) and T/H == | == How to change the delay between trigger (T3) and T/H == | ||
Revision as of 18:44, 21 November 2008
Contents
Reconstruction Program (Guido's program)
The latest (18/Nov/2008) RICH reconstruction program is in adaql#/adaqfs/home/adaq/e06010/cusanno/test_src where #=1...7.
The cluster reconstruction is disabled
Replay and analize the data
The latest (18/Nov/2008) macros, db and tools are in the directory adaql#/adaqfs/home/adaq/e06010/cusanno/onlana1
To replay the data:
1. enter analyzer
2. do: replay_det_L(#run, #event)
3. when done, exit analyzer
4. use on the available macros: the old evdisplay.C or ec_ana.C which is in progress
How to change the delay between trigger (T3) and T/H
Approximate instruction:
1. ssh atrig@adaql2
2. cd trigger
3. trig -e trigger-left.map
4. Push Ldelay1
5. The last 3rd and 2nd register define the fine delay of the two signals (8 = -120 ns, 128 = + 120 ns)
Ask Alexandre for detailed information
Pedestals
Back to the Left RICH home page
