Difference between revisions of "Documentation of SBS-offline"
From Hall A Wiki
(→Prerequisites) |
(→Prerequisites) |
||
| Line 12: | Line 12: | ||
*Working [https://root.cern.ch/drupal/ ROOT] installation. '''libsbsdig is compatible with ROOT version 5 and ROOT version 6'''. '''''ROOT 6 is strongly recommended''''' | *Working [https://root.cern.ch/drupal/ ROOT] installation. '''libsbsdig is compatible with ROOT version 5 and ROOT version 6'''. '''''ROOT 6 is strongly recommended''''' | ||
*Working analyzer '''built with cmake'''. for that purpose, refer to the instruction below. | *Working analyzer '''built with cmake'''. for that purpose, refer to the instruction below. | ||
| − | + | clone the analyzer repository from: | |
| − | git clone git@github.com:JeffersonLab/analyzer.git | + | * git clone git@github.com:JeffersonLab/analyzer.git |
| − | + | build it with cmake following the instructions at: | |
| − | https://github.com/JeffersonLab/analyzer#compiling-with-cmake | + | * https://github.com/JeffersonLab/analyzer#compiling-with-cmake |
2 precisions: - it seems that in these instructions the "build" directory | 2 precisions: - it seems that in these instructions the "build" directory | ||
| − | + | ''has to be'' in the analyzer directory. | |
- for your environment settings, in addition to the two | - for your environment settings, in addition to the two | ||
lines mentionned in the instructions, you still want to | lines mentionned in the instructions, you still want to | ||
Revision as of 15:06, 26 February 2020
Contents
Documentation of SBS-offline: Overview
This page is maintained by the UConn group (Eric Fuchey + Andrew Puckett) and as of February 14, 2020 is specific to the master branch of SBS-offline on github.
Purpose
This page documents the SBS-offline program code, which purpose is to perform the data analysis for the upcoming SBS experiments.
Getting the code and building the program
Prerequisites
- Working ROOT installation. libsbsdig is compatible with ROOT version 5 and ROOT version 6. ROOT 6 is strongly recommended
- Working analyzer built with cmake. for that purpose, refer to the instruction below.
clone the analyzer repository from:
* git clone git@github.com:JeffersonLab/analyzer.git
build it with cmake following the instructions at:
* https://github.com/JeffersonLab/analyzer#compiling-with-cmake
2 precisions: - it seems that in these instructions the "build" directory has to be in the analyzer directory.
- for your environment settings, in addition to the two
lines mentionned in the instructions, you still want to define ANALYZER as the path to your install directory e.g.
setenv ANALYZER $HOME/local/analyzer
Useful links
- Git Documentation
- Github.com homepage for g4sbs
