Revision as of 09:48, 8 June 2023

For any question, email Zhiwen Zhao zwzhao@jlab.org

Why

Usually we are running code on ifarm without caring about graphic because it's used for a test ground for farm job anyway.

Sometimes we do want to test a code's graphic feature. For example, it's a common system we all have access and can be used for debug.

Xwindow forwarding (when your computer is inside jlab network, otherwise this might be too slow)

It is simply use Xwindow forwarding by ssh into ifarm and run the code.

Xwindow graphic is always rendered in your local machine. This is not only very slow if your machines is outside of jlab network, but also can have different results for different people because their local machines are different. Sometimes, it can even cause crash of your local machine if your code is not nice and your local machine is very different from ifarm.

ssh -XY your_lab_username@ifarm          (login with Xwindow forwarding enabled for linux and Mac)
xclock &                                 (test if Xwindow forwarding works)                                            

If you local machine is windows, you need to have a Xwindow server like Xming-mesa running. You also you need to enable Xwindows forwarding in putty option to use ssh

If you local machine is Mac, you need to have a Xwindow server installed and enabled

connect to ifarm at jlab by vnc (recommended for access from outside jlab)

you can do it by vnc and ssh tunneling

vncserver should run on a machine inside jlab like jlabl1,...,jlabl5. It shouldn't run inside any ifarm machine as computer center will kill it when you running too many processes on ifarm.

start vnc server

First you need to start a vncserver on jlabl5 as an example

ssh -XY your_lab_username@jlabl5.jlab.org (login with Xwindow forwarding enabled)
mkdir .vnc
edit .vnc/xstartup with lines below
        #!/bin/sh
        xsetroot -solid grey
        vncconfig -iconic &
        xterm -geometry 160x50+10+10 -ls -title "$VNCDESKTOP Desktop" &
        metacity &
chmod 755 .vnc/xstartup
vncserver                           (start vnc server)
or
vncserver -bs                       (start vnc server this way if somehow quitting program root will kill vncserver)
(give a password if running it first time, or run vncpasswd to enter password
note the vnc server port number output on screen
make sure to kill the server after you using it to free resource on ifarm,
otherwise it will keep running even after you log out!)
vncserver -kill :port         (replace port with correct vnc server port number, note the space before colons)

Next you can test to see if your vncserver runs ok. (It's slow if your machine is not at jlab network)

ssh -XY your_lab_username@jlabl5   (login with Xwindow forwarding enabled)
vncviewer localhost:port            (replace port with correct vnc server port number)

ssh tunneling

To run vncviewer on your machine outside jlab, it's best by ssh tunneling

• built ssh tunnel as follows with correct port number of vnc server
  • if your linux or mac machine is at jlab, run "ssh -X -N -g -L 5999:localhost:port your_lab_username@jlabl5.jlab.org"
  • if your linux or mac machine is outside jlab, run "ssh -X -N -g -L 5922:jlabl5:22 your_lab_username@login.jlab.org" and run in another terminal "ssh -X -N -g -L 5999:localhost:port your_lab_username@localhost -p 5922" (both terminals will just stay there without allowing you to input anything and you keep both alive.)
  • if you windows machine is at jlab, use putty to connect to jlabl5.jlab.org:22 by add Connection->SSH->Tunnels with source port 5999 and destination localhost:port"
  • if you windows machine is outside jlab, use putty to connect to login.jlab.org by add Connection->SSH->Tunnels with source port 5922 and destination jlabl5:22" and another putty to connect to localhost:5922 by add Connection->SSH->Tunnels with source port 5999 and destination localhost:port"
• get a good vncviewer or use a default one after "yum install tigervnc"
• then run vncviewer and connect to localhost:5999 (choose lower graphic quality for better speed and scale to window size in option for best use)

connect to any machine's main desktop at jlab by x11vnc

"vncserver" create a new X server independent of the main X server.

But you can connect to main desktop by "x11vnc" and ssh tunneling as if you are sitting in front of it

at the remote host, 
if x11vnc is not installed, run "yum install x11vnc" as root to install it. If you have ssh key on login server or your remote host, disable it temporarily by renaming .ssh/authorized_keys.
as an example, start x11vnc in the machine called testmachine.jlab.org as follows
run "x11vnc -localhost -auth guess -display :0 -repeat -shared -forever -rfbport 5900 &"
It's preferred to run it as root so that you can do vnc even before login after computer boots. 
If you don't have root access, just run it as regular user, but sometime it fails after computer reboot because xwindow auth can't be established. then the fix is usually that you have to login in front of your computer first

at your local machine, as an example,connect to host testmachine from your machine outside jlab as follows
For linux or mac, run in a terminal "ssh -X -N -g -L 5922:testmachine:22 your_lab_username@login.jlab.org", then run in another terminal "ssh -X -N -g -L 5999:localhost:5900 your_lab_username@localhost -p 5922" (both terminals will just stay there without allowing you to input anything and you keep both alive.)
For windows, use putty to connect to login.jlab.org by add Connection->SSH->Tunnels with source port 5922 and destination testmachine:22" and another putty to connect to localhost:5922 by add Connection->SSH->Tunnels with source port 5999 and destination localhost:5900"
The first ssh tunneling connect your localhost:5922 to testmachine:22 through login:22 and the second ssh tunneling connect your localhost:5900 to testmachine:5900 through localhost5922 which is actually testmachine:22 

at your local machine, get vncviewer
then run vncviewer and connect to localhost:99
choose lower graphic quality for better speed and scale to window size in option for best use