Difference between revisions of "Remote Crate Resets"

Latest revision as of 19:23, 3 February 2011

There are a few ways to reboot the BigBite DAQ crates (TS12, ROC5, ROC8, ROC9, ROC10).

ROC1/ROC2

• Type "reboot" in the portserver terminal window.
• If doing above doesn't help then go to HALL-A tools screen on hacsbc2 (left-hand side of shift leader's computer)
• Under "MISCELLANEOUS" section click on "Crate Resets" and under "Resets from the Electron Detector Stack (right) Crate" look for SFI (Fastbus ROC 1 & ROC 2) #1 and click on "click to reset" button.

TS0

• Type "reboot" in the portserver terminal window.
• If doing above doesn't help then go to HALL-A tools screen on hacsbc2 (left-hand side of shift leader's computer)
• Under "MISCELLANEOUS" section click on "Crate Resets" and under "Resets from the Electron Detector Stack (right) Crate" look for Trigger Supervisor and click on "click to reset" button.

ROC3/ROC4

• Type "reboot" in the portserver terminal window.
• If doing above doesn't help then go to HALL-A tools screen on hacsbc2 (left-hand side of shift leader's computer)
• Under "MISCELLANEOUS" section click on "Crate Resets" and under "Resets from the Hadron Detector Stack (left) Crate" look for SFI (Fastbus ROC 3 & ROC 4) #1 and click on "click to reset" button.

TS11

• Type "reboot" in the portserver terminal window.
• If doing above doesn't help then go to HALL-A tools screen on hacsbc2 (left-hand side of shift leader's computer)
• Under "MISCELLANEOUS" section click on "Crate Resets" and under "Resets from the Hadron Detector Stack (left) Crate" look for Trigger Supervisor and click on "click to reset" button.

TS1

• Type "reboot" in the portserver terminal window
• If doing above doesn't help then direct a webbrowser to hareboot30, and perform an "Immediate Reboot" for Outlet 1.
• The password is located near the white board.

ROC5

• Type "reboot" in the portserver terminal window
• If doing above doesn't help then direct a webbrowser to hareboot28, and perform an "Immediate Reboot" for the switch labeled bbvme1 ROC5 on Outlet 1.
• The password is located near the white board.

ROC8/ROC9/ROC10

• Type "reboot" in the portserver terminal window. If it doesn't work then
• Log into an adaq machine using the adaq account... e.g.

[adaq@adaql4 adaq]$ ssh adaq@adaql1

Run "crate_reset roc8" for example to reset roc8

[adaq@adaql1 adaq]$ crate_reset
USAGE: /adaqfs/home/adaq/brad/camac_control/crate_reset [options] <rocID> [<rocID> ... ]
  -v     verbose.
  -h     This help text.
---
 rocID   Channel   Description
 -----   -------   -----------
 roc10     10      Lower FASTBUS TDC crate
 roc8       8      FASTBUS ADC crate
 roc9       9      Upper FASTBUS TDC crate
 ts2        2      Hadron Trigger Supervisor
---
 Using controller IP: bbcamac1.jlab.org.  I/O reg in slot 11
 Using cnaf command:  './cnafb'

If you get :

1. CMD:ERR

type in CAEN to access the menu