G2p Analysis Minutes
Minutes of the weekly analysis meetings
6/22/2011: Present: Kalyan, Jixie, Chao, Pengjia, Mellisa, Vincent, Ryan, Toby, Alexandre, Jie Liu
- Toby:
1) Tested 4 cables for the slow raster with Ryan
2) Worked with Chao and Jixie to prepare to measure the target field
- Ryan:
1) Continue working on the HRS trigger
- Melissa:
1) Replaying xgt2 data. Looking at the pedestal of adc to find out if there are dead channels
2) Updating the safety document for g2p based on the one used in SANE experiment
- Chao:
1) Preparing a computer in the hall for the DAQ of the 3rd arm 2) Preparing for the target field measurement
- Pengjia:
1) Continue working on the remote control program for the function generator
- Kalyan:
1) Continue designing the 3rd arm
2) Got confirmed from Al that 3rd arm can not be used in GEP
- Jixie:
1) Learning the optics from Nilanga, will meet with Vince to discuss the optics plan
2) Tri to test the magnetize effect of the translation table. Replaced some steel bolts and nuts
with plastic ones. Toby and Chao will make a coil to test the stainless steel.
3) Running simulation to get local beam dump opening for Al. But the HRS transportation routines
from Min do not work.
