Polhe3 item material list
From Hall A Wiki
- Oven Body Material: Ceramics
- Calcium Silicate CS85 (light) http://advancedmaterialscience.com/products/cs85_bnz.html
- Alumina Silicate Lava (heavy) http://graphitestore.com "Alumina plates, rods, tubes" unfired
- RTV, Permatex 26C, pn 81409 High Temp RTV Silicone (Pep Boys).
- Dowel pins needed to attach the bottom plate to the ovens side walls http://www.mcmaster.com/#8446k15/=evgqtp
- UVa used for oven seals, gasket between cell mounting plate and oven bottom: 1/16" thick silicone sheet http://www.mcmaster.com/#standard-silicone-rubber-sheet-gaskets/=euztp5
- Target cell glass properties, GE180 and Corning 1720 http://galileo.phys.virginia.edu/research/groups/spinphysics/glass_properties.html
- Possible epoxy to replace kapton tape for mounting RTDs?? http://www.lakeshore.com/temp/acc/am_epoxyts.html
