G2pmagnets

SEPTA

• There is no “regulator” on the septum magnets. You must set each one manually.
• DO NOT USE "Septum Ramp Controls".
• Use Septum Right Controls for the right side
• Use Septum Left Controls for the left side
• Use "~adaq/bin/GetSeptaCurrent <P0>" to calculate the current for P0 in GeV.

SPECTROMETERS

• The correct “tune” for the spectrometers is “g2p/Gep_1” which you’ll see on the regulator controls page (The button to the right of GeV/c after the P0 set box). This determines the quadrupole and dipole settings for the spectrometer proper.
• Make sure the regulator is ON during normal running.