3rd Arm DAQ for g2p

From Hall A Wiki
Revision as of 12:21, 22 February 2012 by Cg2ja (Talk | contribs) (New page: ==Normal DAQ Operations== ====Account Info==== * 3rd Arm DAQ is running separately with the HRS DAQs. ** 3rd Arm DAQ runs on the adaql3 computer on the adev account. ** 3rd Arm DAQ is usi...)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Normal DAQ Operations

Account Info

  • 3rd Arm DAQ is running separately with the HRS DAQs.
    • 3rd Arm DAQ runs on the adaql3 computer on the adev account.
    • 3rd Arm DAQ is using CODA 2.5.

Start and Stop Runs

  • To start and stop runs, push the buttons “Start” and “End”.
    • No need to use "Prestart", "Start" will do "Prestart and "Go" in sequence.
    • If the run control is not running, follow the Cold Restart section below.

CODA Configurations

  • We are using "thirdarm_buf" configuration for 3rd arm.
    • The configurations should be loaded by default.
    • To change configurations, click on the "Reset" button on the left, then press "Configure" button, choose the configuration from the dialog box, then push the "Download" button.

Editing Prescale Factors

Retrieved from "https://hallaweb.jlab.org/wiki/index.php?title=3rd_Arm_DAQ_for_g2p&oldid=14507"