BigBite/CamacThresholdControl
From Hall A Wiki
Trigger Plane Threshold Control
To change the discriminator thresholds for the E and deltaE planes, a tcl/tk GUI has been written (as a front-end to cnaf). This GUI communicates with a CAMAC controller, which in turn changes the thresholds on the E and deltaE signals.
To start the GUI, log into any adaq machine as a-onl... e.g.:
[adaq@adaql1 adaq]$ ssh a-onl@adaql1
At the prompt, start up the GUI:
[a-onl@adaql1 ~]$ BB_threshold
After a few seconds, the GUI should appear:
